Computer Security
[EN] securityvulns.ru no-pyccku


Related information

  Microsoft SMB client multiple security vulnerabilities

  Microsoft Security Bulletin MS10-020 - Critical Vulnerabilities in SMB Client Could Allow Remote Code Execution (980232)

  stratsec Security Advisory SS-2010-003 - Microsoft SMB Client Pool Overflow

From:MICROSOFT <secure_(at)_microsoft.com>
Date:10.02.2010
Subject:Microsoft Security Bulletin MS10-006 - Critical Vulnerabilities in SMB Client Could Allow Remote Code Execution (978251)

Microsoft Security Bulletin MS10-006 - Critical
Vulnerabilities in SMB Client Could Allow Remote Code Execution (978251)
Published: February 09, 2010

Version: 1.0
General Information
Executive Summary

This security update resolves two privately reported vulnerabilities in Microsoft Windows. The vulnerabilities could allow remote code execution if an attacker sent a specially crafted SMB response to a client-initiated SMB request. To exploit these vulnerabilities, an attacker must convince the user to initiate an SMB connection to a malicious SMB server.

This security update is rated Critical for Microsoft Windows 2000, Windows XP, Windows Server 2003, Windows 7, and Windows Server 2008 R2, and is rated Important for Windows Vista and Windows Server 2008. For more information, see the subsection, Affected and Non-Affected Software, in this section.

The security update addresses the vulnerabilities by correcting the manner in which the SMB client validates responses. For more information about the vulnerabilities, see the Frequently Asked Questions (FAQ) subsection for the specific vulnerability entry under the next section, Vulnerability Information.

Recommendation.  The majority of customers have automatic updating enabled and will not need to take any action because this security update will be downloaded and installed automatically. Customers who have not enabled automatic updating need to check for updates and install this update manually. For information about specific configuration options in automatic updating, see Microsoft Knowledge Base Article 294871.

For administrators and enterprise installations, or end users who want to install this security update manually, Microsoft recommends that customers apply the update immediately using update management software, or by checking for updates using the Microsoft Update service.

See also the section, Detection and Deployment Tools and Guidance, later in this bulletin.

Known Issues. None
Top of sectionTop of section
Affected and Non-Affected Software

The following software have been tested to determine which versions or editions are affected. Other versions or editions are either past their support life cycle or are not affected. To determine the support life cycle for your software version or edition, visit Microsoft Support Lifecycle.

Affected Software
Operating System Maximum Security Impact Aggregate Severity Rating Bulletins Replaced by this Update

Microsoft Windows 2000 Service Pack 4


Remote Code Execution


Critical


MS06-030

Windows XP Service Pack 2 and Windows XP Service Pack 3


Remote Code Execution


Critical


MS08-068

Windows XP Professional x64 Edition Service Pack 2


Remote Code Execution


Critical


MS08-068

Windows Server 2003 Service Pack 2


Remote Code Execution


Critical


MS08-068

Windows Server 2003 x64 Edition Service Pack 2


Remote Code Execution


Critical


MS08-068

Windows Server 2003 with SP2 for Itanium-based Systems


Remote Code Execution


Critical


MS08-068

Windows Vista and Windows Vista Service Pack 1


Elevation of Privilege


Important


MS08-068

Windows Vista Service Pack 2


Elevation of Privilege


Important


None

Windows Vista x64 Edition and Windows Vista x64 Edition Service Pack 1


Elevation of Privilege


Important


MS08-068

Windows Vista x64 Edition Service Pack 2


Elevation of Privilege


Important


None

Windows Server 2008 for 32-bit Systems*


Elevation of Privilege


Important


MS08-068

Windows Server 2008 for 32-bit Systems Service Pack 2*


Elevation of Privilege


Important


None

Windows Server 2008 for x64-based Systems*


Elevation of Privilege


Important


MS08-068

Windows Server 2008 for x64-based Systems Service Pack 2*


Elevation of Privilege


Important


None

Windows Server 2008 for Itanium-based Systems


Elevation of Privilege


Important


MS08-068

Windows Server 2008 for Itanium-based Systems Service Pack 2


Elevation of Privilege


Important


None

Windows 7 for 32-bit Systems


Remote Code Execution


Critical


None

Windows 7 for x64-based Systems


Remote Code Execution


Critical


None

Windows Server 2008 R2 for x64-based Systems*


Remote Code Execution


Critical


None

Windows Server 2008 R2 for Itanium-based Systems


Remote Code Execution


Critical


None

*Server Core installation affected. This update applies, with the same severity rating, to supported editions of Windows Server 2008 or Windows Server 2008 R2 as indicated, whether or not installed using the Server Core installation option. For more information on this installation option, see the MSDN articles, Server Core and Server Core for Windows Server 2008 R2. Note that the Server Core installation option does not apply to certain editions of Windows Server 2008 and Windows Server 2008 R2; see Compare Server Core Installation Options.
Top of sectionTop of section

Frequently Asked Questions (FAQ) Related to This Security Update

Where are the file information details?
Refer to the reference tables in the Security Update Deployment section for the location of the file information details.

Why does this update address several reported security vulnerabilities?
This update contains support for several vulnerabilities because the modifications that are required to address these issues are located in related files. Instead of having to install several updates that are almost the same, customers need to install this update only.

Is this security update related to MS10-012, released on February 9, 2010?
No. Microsoft Security Bulletin MS10-012, "Vulnerabilities in SMB Server Could Allow Remote Code Execution," addresses different SMB components. This security update may be applied independently of any other update.

If I have installed the MS10-012 update, do I still need to install this update?
Yes. This security bulletin update addresses vulnerabilities in Windows SMB Client components, while MS10-012 addresses vulnerabilities in Windows SMB Server components.

I am using an older release of the software discussed in this security bulletin. What should I do?
The affected software listed in this bulletin have been tested to determine which releases are affected. Other releases are past their support life cycle. For more information about the product lifecycle, visit the Microsoft Support Lifecycle Web site.

It should be a priority for customers who have older releases of the software to migrate to supported releases to prevent potential exposure to vulnerabilities. To determine the support lifecycle for your software release, see Select a Product for Lifecycle Information. For more information about service packs for these software releases, see Lifecycle Supported Service Packs.

Customers who require custom support for older software must contact their Microsoft account team representative, their Technical Account Manager, or the appropriate Microsoft partner representative for custom support options. Customers without an Alliance, Premier, or Authorized Contract can contact their local Microsoft sales office. For contact information, visit the Microsoft Worldwide Information Web site, select the country in the Contact Information list, and then click Go to see a list of telephone numbers. When you call, ask to speak with the local Premier Support sales manager. For more information, see the Microsoft Support Lifecycle Policy FAQ.
Top of sectionTop of section
Vulnerability Information

Severity Ratings and Vulnerability Identifiers

The following severity ratings assume the potential maximum impact of the vulnerability. For information regarding the likelihood, within 30 days of this security bulletin's release, of the exploitability of the vulnerability in relation to its severity rating and security impact, please see the Exploitability Index in the February bulletin summary. For more information, see Microsoft Exploitability Index.
Vulnerability Severity Rating and Maximum Security Impact by Affected Software
Affected Software SMB Client Pool Corruption Vulnerability - CVE-2010-0016 SMB Client Race Condition Vulnerability - CVE-2010-0017 Aggregate Severity Rating

Microsoft Windows 2000 Service Pack 4


Critical
Remote Code Execution


Not applicable


Critical

Windows XP Service Pack 2 and Windows XP Service Pack 3


Critical
Remote Code Execution


Not applicable


Critical

Windows XP Professional x64 Edition Service Pack 2


Critical
Remote Code Execution


Not applicable


Critical

Windows Server 2003 Service Pack 2


Critical
Remote Code Execution


Not applicable


Critical

Windows Server 2003 x64 Edition Service Pack 2


Critical
Remote Code Execution


Not applicable


Critical

Windows Server 2003 with SP2 for Itanium-based Systems


Critical
Remote Code Execution


Not applicable


Critical

Windows Vista, Windows Vista Service Pack 1, and Windows Vista Service Pack 2


Not applicable


Important
Elevation of Privilege


Important

Windows Vista x64 Edition, Windows Vista x64 Edition Service Pack 1, and Windows Vista x64 Edition Service Pack 2


Not applicable


Important
Elevation of Privilege


Important

Windows Server 2008 for 32-bit Systems and Windows Server 2008 for 32-bit Systems Service Pack 2*


Not applicable


Important
Elevation of Privilege


Important

Windows Server 2008 for x64-based Systems and Windows Server 2008 for x64-based Systems Service Pack 2*


Not applicable


Important
Elevation of Privilege


Important

Windows Server 2008 for Itanium-based Systems and Windows Server 2008 for Itanium-based Systems Service Pack 2


Not applicable


Important
Elevation of Privilege


Important

Windows 7 for 32-bit Systems


Not applicable


Critical
Remote Code Execution


Critical

Windows 7 for x64-based Systems


Not applicable


Critical
Remote Code Execution


Critical

Windows Server 2008 R2 for x64-based Systems*


Not applicable


Critical
Remote Code Execution


Critical

Windows Server 2008 R2 for Itanium-based Systems


Not applicable


Critical
Remote Code Execution


Critical

*Server Core installation affected. This update applies, with the same severity rating, to supported editions of Windows Server 2008 and Windows Server 2008 R2, whether or not installed using the Server Core installation option. For more information on this installation option, see the MSDN articles, Server Core and Server Core for Windows Server 2008 R2. Note that the Server Core installation option does not apply to certain editions of Windows Server 2008 and Windows Server 2008 R2; see Compare Server Core Installation Options.
Top of sectionTop of section

SMB Client Pool Corruption Vulnerability - CVE-2010-0016

An unauthenticated remote code execution vulnerability exists in the way that Microsoft Server Message Block (SMB) Protocol software handles specially crafted SMB responses. An attempt to exploit the vulnerability would not require authentication, allowing an attacker to exploit the vulnerability by sending a specially crafted SMB response to a client-initiated SMB request. An attacker who successfully exploited this vulnerability could take complete control of the system.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2010-0016.

Mitigating Factors for SMB Client Pool Corruption Vulnerability - CVE-2010-0016

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:


This is an SMB client vulnerability. In order to exploit this vulnerability, an attacker must convince a user to initiate an SMB connection with a malicious SMB server. Firewall best practices and standard default firewall configurations can help protect networks from attacks that originate outside the enterprise perimeter. Best practices recommend that systems that are connected to the Internet have a minimal number of ports exposed. In this case, the SMB ports should be blocked from the Internet.
Top of sectionTop of section

Workarounds for SMB Client Pool Corruption Vulnerability - CVE-2010-0016

Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality:


Block TCP ports 139 and 445 at the firewall

These ports are used to initiate a connection with the affected component. Blocking TCP ports 139 and 445 at the firewall will help protect systems that are behind that firewall from attempts to exploit this vulnerability. Microsoft recommends that you block all unsolicited inbound communication from the Internet to help prevent attacks that may use other ports. For more information about ports, see the TechNet article, TCP and UDP Port Assignments.

Impact of workaround. Several Windows services use the affected ports. Blocking connectivity to the ports may cause various applications or services to not function. Some of the applications or services that could be impacted are listed below:


Applications that use SMB (CIFS)


Applications that use mailslots or named pipes (RPC over SMB)


Server (File and Print Sharing)


Group Policy


Net Logon


Distributed File System (DFS)


Terminal Server Licensing


Print Spooler


Computer Browser


Remote Procedure Call Locator


Fax Service


Indexing Service


Performance Logs and Alerts


Systems Management Server


License Logging Service

How to undo the workaround. Unblock TCP ports 139 and 445 at the firewall. For more information about ports, see TCP and UDP Port Assignments.
Top of sectionTop of section

FAQ for SMB Client Pool Corruption Vulnerability - CVE-2010-0016

What is the scope of the vulnerability?
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

What causes the vulnerability?
The vulnerability is caused by the Microsoft Server Message Block (SMB) client implementation improperly validating fields in the SMB response. This could lead to a pool corruption issue resulting in code execution with system level privileges.

What is Microsoft Server Message Block (SMB) protocol?
Microsoft Server Message Block (SMB) protocol is a Microsoft network file sharing protocol used in Microsoft Windows. For more information on SMB, see Microsoft SMB Protocol and CIFS Protocol Overview.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could take complete control of an affected system. Most attempts to exploit this vulnerability will cause an affected system to stop responding and restart.

How could an attacker exploit the vulnerability?
An attacker could host a malicious SMB server that is designed to exploit this vulnerability and then convince a user to initiate an SMB connection with it. Additionally, an attacker on the local network could perform a man-in-the-middle attack to respond to a legitimate SMB request with a malformed SMB response.

What systems are primarily at risk from the vulnerability?
All affected operating systems are at risk.

Can this vulnerability be exploited using Internet Explorer?
No. However, this issue may be exploited through Web transactions, regardless of browser type. In a Web-based attack scenario, an attacker would have to host a Web page that contains a specially crafted URI. A user who browsed that Web site will force an SMB connection to an SMB server controlled by the attacker, which would then send a malformed response back to the user. This response would result in code execution on the user's system. In addition, compromised Web sites and Web sites that accept or host user-provided content could contain specially crafted content that could exploit this vulnerability. An attacker would have no way to force users to visit a specially crafted Web site. Instead, an attacker would have to convince them to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes them to the attacker's site.

What is a URI?
A Uniform Resource Identifier (URI) is a string of characters used to act on or identify resources from the Internet or over a network. A URL is a typical example of a URI that references a resource such as a Web site. For more information about URIs, see RFC-2396.

What does the update do?
The update addresses the vulnerability by correcting the way fields in the SMB response are validated.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through responsible disclosure.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers when this security bulletin was originally issued.
Top of sectionTop of section
Top of sectionTop of section

SMB Client Race Condition Vulnerability - CVE-2010-0017

An unauthenticated remote code execution vulnerability exists in the way that Microsoft Server Message Block (SMB) Protocol software handles specially crafted SMB packets. An attempt to exploit the vulnerability would not require authentication, allowing an attacker to exploit the vulnerability by sending a specially crafted SMB response to client-initiated SMB request. An attacker who successfully exploited this vulnerability could take complete control of the system.

On Windows Vista and Windows Server 2008, this vulnerability could result in an elevation of privilege vulnerability due to the way that Microsoft Server Message Block (SMB) Protocol software handles specially crafted SMB negotiate responses. An attacker who successfully exploited this vulnerability could run arbitrary code with system-level privileges. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. An attacker must have valid logon credentials and be able to log on locally to elevate privileges in this manner.

This vulnerability could also result in a denial of service. An attempt to exploit the vulnerability in this manner would not require authentication, allowing an attacker to exploit the vulnerability by sending a specially crafted SMB response to a client-initiated SMB request. An attacker who successfully exploited this vulnerability could cause the computer to stop responding until restarted.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2010-0017.

Mitigating Factors for SMB Client Race Condition Vulnerability - CVE-2010-0017

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:


In order to elevate privileges on Windows Vista and Windows Server 2008, an attacker must have valid logon credentials and be able to log on locally to exploit this vulnerability. The privilege elevation vulnerability could not be exploited remotely or by anonymous users on these platforms. Firewall best practices and standard default firewall configurations can help protect networks from attacks that originate outside the enterprise perimeter. Best practices recommend that systems that are connected to the Internet have a minimal number of ports exposed.
Top of sectionTop of section

Workarounds for SMB Client Race Condition Vulnerability - CVE-2010-0017

Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality:


Block TCP ports 139 and 445 at the firewall

These ports are used to initiate a connection with the affected component. Blocking TCP ports 139 and 445 at the firewall will help protect systems that are behind that firewall from attempts to exploit this vulnerability. Microsoft recommends that you block all unsolicited inbound communication from the Internet to help prevent attacks that may use other ports. For more information about ports, see the TechNet article, TCP and UDP Port Assignments.

Impact of workaround. Several Windows services use the affected ports. Blocking connectivity to the ports may cause various applications or services to not function. Some of the applications or services that could be impacted are listed below:


Applications that use SMB (CIFS)


Applications that use mailslots or named pipes (RPC over SMB)


Server (File and Print Sharing)


Group Policy


Net Logon


Distributed File System (DFS)


Terminal Server Licensing


Print Spooler


Computer Browser


Remote Procedure Call Locator


Fax Service


Indexing Service


Performance Logs and Alerts


Systems Management Server


License Logging Service

How to undo the workaround. Unblock TCP ports 139 and 445 at the firewall. For more information about ports, see TCP and UDP Port Assignments.
Top of sectionTop of section

FAQ for SMB Client Race Condition Vulnerability - CVE-2010-0017

What is the scope of the vulnerability?
On Windows 7 and Windows Server 2008 R2, this is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

On Windows Vista and Windows Server 2008, this is an elevation of privilege vulnerability. An attacker who successfully exploited this vulnerability could execute arbitrary code and take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

For all affected platforms, this vulnerability could also result in a denial of service. In this case, an attacker who exploited this vulnerability could cause the affected system to stop responding until it is manually restarted. Note that the denial of service vulnerability would not allow an attacker to execute code or to elevate their user rights, but it could cause the affected system to stop accepting requests.

What causes the vulnerability?
The vulnerability is caused by the Microsoft Server Message Block (SMB) client implementation improperly handling a race condition that can occur when handling Negotiate responses.

What is Microsoft Server Message Block (SMB) protocol?
Microsoft Server Message Block (SMB) protocol is a Microsoft network file sharing protocol used in Microsoft Windows. For more information on SMB, see Microsoft SMB Protocol and CIFS Protocol Overview.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could take complete control of an affected system. On Windows Vista and Windows Server 2008, an attacker who successfully exploited this vulnerability could run arbitrary code with system-level privileges. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

An attacker who successfully exploited this vulnerability leading to a denial of service could cause a user's system to stop responding until manually restarted.

How could an attacker exploit the vulnerability?
To exploit this vulnerability to cause remote code execution or a denial of service, an attacker could host a malicious SMB server that is designed to exploit this vulnerability and then convince a user to initiate an SMB connection with it. Additionally, an attacker on the local network could perform a man-in-the-middle attack to respond to a legitimate SMB request with a malformed SMB response.

To exploit this vulnerability to elevate privileges, an attacker would first have to log on to the system. An attacker could then run a specially crafted application that could exploit the vulnerability and take complete control over the affected system.

What systems are primarily at risk from the vulnerability?
All affected operating systems are at risk.

Can this vulnerability be exploited using Internet Explorer?
No. However, this issue may be exploited through Web transactions, regardless of browser type. In a Web-based attack scenario, an attacker would have to host a Web page that contains a specially crafted URI. A user who browsed that Web site will force an SMB connection to an SMB server controlled by the attacker, which would then send a malformed response back to the user. This response would result in code execution on the user's system. In addition, compromised Web sites and Web sites that accept or host user-provided content could contain specially crafted content that could exploit this vulnerability. An attacker would have no way to force users to visit a specially crafted Web site. Instead, an attacker would have to convince them to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes them to the attacker's site.

What is a URI?
A Uniform Resource Identifier (URI) is a string of characters used to act on or identify resources from the Internet or over a network. A URL is a typical example of a URI that references a resource such as a Web site. For more information about URIs, see RFC-2396.

What does the update do?
The update addresses the vulnerability by correcting the manner in which the SMB client handles the race condition that can occur when handling SMB Negotiate responses.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through responsible disclosure.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers when this security bulletin was originally issued.

Other Information
Acknowledgments

Microsoft thanks the following for working with us to help protect customers:


Laurent Gaffié of stratsec for reporting the SMB Client Pool Corruption Vulnerability (CVE-2010-0016) and the SMB Client Race Condition Vulnerability (CVE-2010-0017)
Top of sectionTop of section
Microsoft Active Protections Program (MAPP)

To improve security protections for customers, Microsoft provides vulnerability information to major security software providers in advance of each monthly security update release. Security software providers can then use this vulnerability information to provide updated protections to customers via their security software or devices, such as antivirus, network-based intrusion detection systems, or host-based intrusion prevention systems. To determine whether active protections are available from security software providers, please visit the active protections Web sites provided by program partners, listed in Microsoft Active Protections Program (MAPP) Partners.

Support


Customers in the U.S. and Canada can receive technical support from Security Support or 1-866-PCSAFETY. There is no charge for support calls that are associated with security updates. For more information about available support options, see Microsoft Help and Support.


International customers can receive support from their local Microsoft subsidiaries. There is no charge for support that is associated with security updates. For more information about how to contact Microsoft for support issues, visit the International Support Web site.

Disclaimer

The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.

Revisions


V1.0 (February 9, 2010): Bulletin published.

About | Terms of use | Privacy Policy
© SecurityVulns, 3APA3A, Vladimir Dubrovin
Nizhny Novgorod