Computer Security
[EN] securityvulns.ru no-pyccku


Related information

  Microsoft Internet Explorer multiple security vulnerabilities

  VUPEN Security Research - Microsoft Internet Explorer Animation Use-after-free Vulnerability (VUPEN-SR-2010-
199)

  iDefense Security Advisory 12.14.10: Microsoft Internet Explorer CSS Style Table Layout Uninitialized Memory Vulnerability

  iDefense Security Advisory 12.14.10: Microsoft Internet Explorer HTML Object Memory Corruption Vulnerability

From:MICROSOFT <secure_(at)_microsoft.com>
Date:15.12.2010
Subject:Microsoft Security Bulletin MS10-090 - Critical Cumulative Security Update for Internet Explorer (2416400)

Microsoft Security Bulletin MS10-090 - Critical
Cumulative Security Update for Internet Explorer (2416400)
Published: December 14, 2010

Version: 1.0
General Information
Executive Summary

This security update resolves four privately reported vulnerabilities and three publicly disclosed vulnerabilities in Internet Explorer. The most severe vulnerabilities could allow remote code execution if a user views a specially crafted Web page using Internet Explorer. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

This security update is rated Critical for Internet Explorer 6, Internet Explorer 7, and Internet Explorer 8. For more information, see the subsection, Affected and Non-Affected Software, in this section.

The security update addresses the vulnerabilities by modifying the way that Internet Explorer handles objects in memory and script during certain processes. For more information about the vulnerabilities, see the Frequently Asked Questions (FAQ) subsection for the specific vulnerability entry under the next section, Vulnerability Information.

This security update also addresses the vulnerability first described in Microsoft Security Advisory 2458511.

Recommendation. The majority of customers have automatic updating enabled and will not need to take any action because this security update will be downloaded and installed automatically. Customers who have not enabled automatic updating need to check for updates and install this update manually. For information about specific configuration options in automatic updating, see Microsoft Knowledge Base Article 294871.

For administrators and enterprise installations, or end users who want to install this security update manually, Microsoft recommends that customers apply the update immediately using update management software, or by checking for updates using the Microsoft Update service.

See also the section, Detection and Deployment Tools and Guidance, later in this bulletin.

Known Issues. Microsoft Knowledge Base Article 2416400 documents the currently known issues that customers may experience when installing this security update. The article also documents recommended solutions for these issues.
Top of sectionTop of section
Affected and Non-Affected Software

The following software have been tested to determine which versions or editions are affected. Other versions or editions are either past their support life cycle or are not affected. To determine the support life cycle for your software version or edition, visit Microsoft Support Lifecycle.

Affected Software
Operating System Component Maximum Security Impact Aggregate Severity Rating Bulletins Replaced by This Update
Internet Explorer 6

Windows XP Service Pack 3


Internet Explorer 6


Remote Code Execution


Critical


MS10-071

Windows XP Professional x64 Edition Service Pack 2


Internet Explorer 6


Remote Code Execution


Critical


MS10-071

Windows Server 2003 Service Pack 2


Internet Explorer 6


Remote Code Execution


Critical


MS10-071

Windows Server 2003 x64 Edition Service Pack 2


Internet Explorer 6


Remote Code Execution


Critical


MS10-071

Windows Server 2003 with SP2 for Itanium-based Systems


Internet Explorer 6


Remote Code Execution


Critical


MS10-071
Internet Explorer 7

Windows XP Service Pack 3


Internet Explorer 7


Remote Code Execution


Critical


MS10-071

Windows XP Professional x64 Edition Service Pack 2


Internet Explorer 7


Remote Code Execution


Critical


MS10-071

Windows Server 2003 Service Pack 2


Internet Explorer 7


Remote Code Execution


Critical


MS10-071

Windows Server 2003 x64 Edition Service Pack 2


Internet Explorer 7


Remote Code Execution


Critical


MS10-071

Windows Server 2003 with SP2 for Itanium-based Systems


Internet Explorer 7


Remote Code Execution


Critical


MS10-071

Windows Vista Service Pack 1 and Windows Vista Service Pack 2


Internet Explorer 7


Remote Code Execution


Critical


MS10-071

Windows Vista x64 Edition Service Pack 1 and Windows Vista x64 Edition Service Pack 2


Internet Explorer 7


Remote Code Execution


Critical


MS10-071

Windows Server 2008 for 32-bit Systems and Windows Server 2008 for 32-bit Systems Service Pack 2


Internet Explorer 7**


Remote Code Execution


Critical


MS10-071

Windows Server 2008 for x64-based Systems and Windows Server 2008 for x64-based Systems Service Pack 2


Internet Explorer 7**


Remote Code Execution


Critical


MS10-071

Windows Server 2008 for Itanium-based Systems and Windows Server 2008 for Itanium-based Systems Service Pack 2


Internet Explorer 7


Remote Code Execution


Critical


MS10-071
Internet Explorer 8

Windows XP Service Pack 3


Internet Explorer 8


Remote Code Execution


Critical


MS10-071

Windows XP Professional x64 Edition Service Pack 2


Internet Explorer 8


Remote Code Execution


Critical


MS10-071

Windows Server 2003 Service Pack 2


Internet Explorer 8


Remote Code Execution


Critical


MS10-071

Windows Server 2003 x64 Edition Service Pack 2


Internet Explorer 8


Remote Code Execution


Critical


MS10-071

Windows Vista Service Pack 1 and Windows Vista Service Pack 2


Internet Explorer 8


Remote Code Execution


Critical


MS10-071

Windows Vista x64 Edition Service Pack 1 and Windows Vista x64 Edition Service Pack 2


Internet Explorer 8


Remote Code Execution


Critical


MS10-071

Windows Server 2008 for 32-bit Systems and Windows Server 2008 for 32-bit Systems Service Pack 2


Internet Explorer 8**


Remote Code Execution


Critical


MS10-071

Windows Server 2008 for x64-based Systems and Windows Server 2008 for x64-based Systems Service Pack 2


Internet Explorer 8**


Remote Code Execution


Critical


MS10-071

Windows 7 for 32-bit Systems


Internet Explorer 8


Remote Code Execution


Critical


MS10-071

Windows 7 for x64-based Systems


Internet Explorer 8


Remote Code Execution


Critical


MS10-071

Windows Server 2008 R2 for x64-based Systems


Internet Explorer 8**


Remote Code Execution


Critical


MS10-071

Windows Server 2008 R2 for Itanium-based Systems


Internet Explorer 8


Remote Code Execution


Critical


MS10-071

**Server Core installation not affected. The vulnerabilities addressed by this update do not affect supported editions of Windows Server 2008 or Windows Server 2008 R2 as indicated, when installed using the Server Core installation option. For more information on this installation option, see the TechNet articles, Managing a Server Core Installation and Servicing a Server Core Installation. Note that the Server Core installation option does not apply to certain editions of Windows Server 2008 and Windows Server 2008 R2; see Compare Server Core Installation Options.
Top of sectionTop of section

Frequently Asked Questions (FAQ) Related to This Security Update

Where are the file information details?
Refer to the reference tables in the Security Update Deployment section for the location of the file information details.

How are the Windows 7 Service Pack 1 Beta and Windows Server 2008 R2 Service Pack 1 Beta releases affected by these vulnerabilities?
Windows 7 Service Pack 1 Beta and Windows Server 2008 R2 Service Pack 1 Beta are affected by the vulnerabilities described in this bulletin. Customers running these beta releases are encouraged to download and apply the update to their systems. Security updates are available from Microsoft Update and Windows Update. The security update is also available for download from the Microsoft Download Center.

Is Internet Explorer 9 Beta affected by these vulnerabilities?
No. Internet Explorer 9 Beta is not affected by the vulnerabilities described in this bulletin.

Does this update contain any security-related changes to functionality?
This update includes a defense-in-depth update to help improve cross-domain security in Internet Explorer.

What is defense-in-depth?
In information security, defense-in-depth refers to an approach in which multiple layers of defense are in place to help prevent attackers from compromising the security of a network or system.

Why does this update address several reported security vulnerabilities?
This update contains support for several vulnerabilities because the modifications that are required to address these issues are located in related files. Instead of having to install several updates that are almost the same, customers need to install this update only.

I am using an older release of the software discussed in this security bulletin. What should I do?
The affected software listed in this bulletin have been tested to determine which releases are affected. Other releases are past their support life cycle. For more information about the product lifecycle, visit the Microsoft Support Lifecycle Web site.

It should be a priority for customers who have older releases of the software to migrate to supported releases to prevent potential exposure to vulnerabilities. To determine the support lifecycle for your software release, see Select a Product for Lifecycle Information. For more information about service packs for these software releases, see Lifecycle Supported Service Packs.

Customers who require custom support for older software must contact their Microsoft account team representative, their Technical Account Manager, or the appropriate Microsoft partner representative for custom support options. Customers without an Alliance, Premier, or Authorized Contract can contact their local Microsoft sales office. For contact information, visit the Microsoft Worldwide Information Web site, select the country in the Contact Information list, and then click Go to see a list of telephone numbers. When you call, ask to speak with the local Premier Support sales manager. For more information, see the Microsoft Support Lifecycle Policy FAQ.
Top of sectionTop of section
Vulnerability Information

Severity Ratings and Vulnerability Identifiers

The following severity ratings assume the potential maximum impact of the vulnerability. For information regarding the likelihood, within 30 days of this security bulletin's release, of the exploitability of the vulnerability in relation to its severity rating and security impact, please see the Exploitability Index in the December bulletin summary. For more information, see Microsoft Exploitability Index.
Vulnerability Severity Rating and Maximum Security Impact by Affected Software
Affected Software HTML Object Memory Corruption Vulnerability - CVE-2010-3340 Cross-Domain Information Disclosure Vulnerability - CVE-2010-3342 HTML Object Memory Corruption Vulnerability - CVE-2010-3343 HTML Element Memory Corruption Vulnerability - CVE-2010-3345 HTML Element Memory Corruption Vulnerability - CVE-2010-3346 Cross-Domain Information Disclosure Vulnerability - CVE-2010-3348 Uninitialized Memory Corruption Vulnerability - CVE-2010-3962 Aggregate Severity Rating
Internet Explorer 6

Internet Explorer 6 for Windows XP Service Pack 3


Critical
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Not applicable


Critical
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Critical

Internet Explorer 6 for Windows XP Professional x64 Edition Service Pack 2


Critical
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Not applicable


Critical
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Critical

Internet Explorer 6 for Windows Server 2003 Service Pack 2


Moderate
Remote Code Execution


No severity rating[1]


Moderate
Remote Code Execution


Not applicable


Moderate
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Critical

Internet Explorer 6 for Windows Server 2003 x64 Edition Service Pack 2


Moderate
Remote Code Execution


No severity rating[1]


Moderate
Remote Code Execution


Not applicable


Moderate
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Critical

Internet Explorer 6 for Windows Server 2003 with SP2 for Itanium-based Systems


Moderate
Remote Code Execution


No severity rating[1]


Moderate
Remote Code Execution


Not applicable


Moderate
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Critical
Internet Explorer 7

Internet Explorer 7 for Windows XP Service Pack 3


Critical
Remote Code Execution


Moderate
Information Disclosure


No severity rating[1]


Not applicable


Critical
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Critical

Internet Explorer 7 for Windows XP Professional x64 Edition Service Pack 2


Critical
Remote Code Execution


Moderate
Information Disclosure


No severity rating[1]


Not applicable


Critical
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Critical

Internet Explorer 7 for Windows Server 2003 Service Pack 2


Moderate
Remote Code Execution


No severity rating[1]


No severity rating[1]


Not applicable


Moderate
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Critical

Internet Explorer 7 for Windows Server 2003 x64 Edition Service Pack 2


Moderate
Remote Code Execution


No severity rating[1]


No severity rating[1]


Not applicable


Moderate
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Critical

Internet Explorer 7 for Windows Server 2003 with SP2 for Itanium-based Systems


Moderate
Remote Code Execution


No severity rating[1]


No severity rating[1]


Not applicable


Moderate
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Critical

Internet Explorer 7 in Windows Vista Service Pack 1 and Windows Vista Service Pack 2


Critical
Remote Code Execution


Moderate
Information Disclosure


No severity rating[1]


Not applicable


Critical
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Critical

Internet Explorer 7 in Windows Vista x64 Edition Service Pack 1 and Windows Vista x64 Edition Service Pack 2


Critical
Remote Code Execution


Moderate
Information Disclosure


No severity rating[1]


Not applicable


Critical
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Critical

Internet Explorer 7 in Windows Server 2008 for 32-bit Systems and Windows Server 2008 for 32-bit Systems Service Pack 2**


Moderate
Remote Code Execution


No severity rating[1]


No severity rating[1]


Not applicable


Moderate
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Critical

Internet Explorer 7 in Windows Server 2008 for x64-based Systems and Windows Server 2008 for x64-based Systems Service Pack 2**


Moderate
Remote Code Execution


No severity rating[1]


No severity rating[1]


Not applicable


Moderate
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Critical

Internet Explorer 7 in Windows Server 2008 for Itanium-based Systems and Windows Server 2008 for Itanium-based Systems Service Pack 2


Moderate
Remote Code Execution


No severity rating[1]


No severity rating[1]


Not applicable


Moderate
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Critical
Internet Explorer 8

Internet Explorer 8 for Windows XP Service Pack 3


Not applicable


Moderate
Information Disclosure


No severity rating[1]


Critical
Remote Code Execution


Critical
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Critical

Internet Explorer 8 for Windows XP Professional x64 Edition Service Pack 2


Not applicable


Moderate
Information Disclosure


No severity rating[1]


Critical
Remote Code Execution


Critical
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Critical

Internet Explorer 8 for Windows Server 2003 Service Pack 2


Not applicable


No severity rating[1]


No severity rating[1]


Moderate
Remote Code Execution


Moderate
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Critical

Internet Explorer 8 for Windows Server 2003 x64 Edition Service Pack 2


Not applicable


No severity rating[1]


No severity rating[1]


Moderate
Remote Code Execution


Moderate
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Critical

Internet Explorer 8 in Vista Service Pack 1 and Windows Vista Service Pack 2


Not applicable


Moderate
Information Disclosure


No severity rating[1]


Critical
Remote Code Execution


Critical
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Critical

Internet Explorer 8 in Windows Vista x64 Edition Service Pack 1 and Windows Vista x64 Edition Service Pack 2


Not applicable


Moderate
Information Disclosure


No severity rating[1]


Critical
Remote Code Execution


Critical
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Critical

Internet Explorer 8 in Windows Server 2008 for 32-bit Systems and Windows Server 2008 for 32-bit Systems Service Pack 2**


Not applicable


No severity rating[1]


No severity rating[1]


Moderate
Remote Code Execution


Moderate
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Critical

Internet Explorer 8 in Windows Server 2008 for x64-based Systems and Windows Server 2008 for x64-based Systems Service Pack 2**


Not applicable


No severity rating[1]


No severity rating[1]


Moderate
Remote Code Execution


Moderate
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Critical

Internet Explorer 8 in Windows 7 for 32-bit Systems


Not applicable


Moderate
Information Disclosure


No severity rating[1]


Critical
Remote Code Execution


Critical
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Critical

Internet Explorer 8 in Windows 7 for x64-based Systems


Not applicable


Moderate
Information Disclosure


No severity rating[1]


Critical
Remote Code Execution


Critical
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Critical

Internet Explorer 8 in Windows Server 2008 R2 for x64-based Systems**


Not applicable


No severity rating[1]


No severity rating[1]


Moderate
Remote Code Execution


Moderate
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Critical

Internet Explorer 8 in Windows Server 2008 R2 for Itanium-based Systems


Not applicable


No severity rating[1]


No severity rating[1]


Moderate
Remote Code Execution


Moderate
Remote Code Execution


Moderate
Information Disclosure


Critical
Remote Code Execution


Critical

**Server Core installation not affected. The vulnerabilities addressed by this update do not affect supported editions of Windows Server 2008 or Windows Server 2008 R2 as indicated, when installed using the Server Core installation option. For more information on this installation option, see the TechNet articles, Managing a Server Core Installation and Servicing a Server Core Installation. Note that the Server Core installation option does not apply to certain editions of Windows Server 2008 and Windows Server 2008 R2; see Compare Server Core Installation Options.

[1]Severity ratings do not apply to this update because the vulnerability discussed in this bulletin does not affect this software. However, as a defense-in-depth measure to protect against any possible new vectors identified in the future, Microsoft recommends that customers of this software apply this security update.
Top of sectionTop of section

HTML Object Memory Corruption Vulnerability - CVE-2010-3340

A remote code execution vulnerability exists in the way that Internet Explorer accesses an object that has not been correctly initialized or has been deleted. An attacker could exploit the vulnerability by constructing a specially crafted Web page. When a user views the Web page, the vulnerability could allow remote code execution. An attacker who successfully exploited this vulnerability could gain the same user rights as the logged-on user. If a user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2010-3340.

Mitigating Factors for HTML Object Memory Corruption Vulnerability - CVE-2010-3340

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:


An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.


In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site.


By default, all supported versions of Microsoft Outlook, Microsoft Outlook Express, and Windows Mail open HTML e-mail messages in the Restricted sites zone, which disables script and ActiveX controls, removing the risk of an attacker being able to use this vulnerability to execute malicious code. If a user clicks a link in an e-mail message, the user could still be vulnerable to exploitation of this vulnerability through the Web-based attack scenario.


By default, Internet Explorer on Windows Server 2003 and Windows Server 2008 runs in a restricted mode that is known as Enhanced Security Configuration. This mode sets the security level for the Internet zone to High. This is a mitigating factor for Web sites that you have not added to the Internet Explorer Trusted sites zone. See the FAQ subsection of this vulnerability section for more information about Internet Explorer Enhanced Security Configuration.
Top of sectionTop of section

Workarounds for HTML Object Memory Corruption Vulnerability - CVE-2010-3340

Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality:


Set Internet and Local intranet security zone settings to "High" to block ActiveX Controls and Active Scripting in these zones

You can help protect against exploitation of this vulnerability by changing your settings for the Internet security zone to block ActiveX controls and Active Scripting. You can do this by setting your browser security to High.

To raise the browsing security level in Internet Explorer, follow these steps:

1.


On the Internet Explorer Tools menu, click Internet Options.

2.


In the Internet Options dialog box, click the Security tab, and then click the Internet icon.

3.


Under Security level for this zone, move the slider to High. This sets the security level for all Web sites you visit to High.

Note If no slider is visible, click Default Level, and then move the slider to High.

Note Setting the level to High may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly even with the security setting set to High.

Impact of workaround. There are side effects to blocking ActiveX Controls and Active Scripting. Many Web sites that are on the Internet or on an intranet use ActiveX or Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX Controls to provide menus, ordering forms, or even account statements. Blocking ActiveX Controls or Active Scripting is a global setting that affects all Internet and intranet sites. If you do not want to block ActiveX Controls or Active Scripting for such sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone".

Add sites that you trust to the Internet Explorer Trusted sites zone

After you set Internet Explorer to block ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect yourself from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

To do this, follow these steps:

1.


In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.

2.


In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.

3.


If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.

4.


In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.

5.


Repeat these steps for each site that you want to add to the zone.

6.


Click OK two times to accept the changes and return to Internet Explorer.

Note Add any sites that you trust not to take malicious action on your system. Two in particular that you may want to add are *.windowsupdate.microsoft.com and *.update.microsoft.com. These are the sites that will host the update, and it requires an ActiveX Control to install the update.


Configure Internet Explorer to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone

You can help protect against exploitation of this vulnerability by changing your settings to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone. To do this, follow these steps:

1.


In Internet Explorer, click Internet Options on the Tools menu.

2.


Click the Security tab.

3.


Click Internet, and then click Custom Level.

4.


Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.

5.


Click Local intranet, and then click Custom Level.

6.


Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.

7.


Click OK two times to return to Internet Explorer.

Note Disabling Active Scripting in the Internet and Local intranet security zones may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly.

Impact of workaround. There are side effects to prompting before running Active Scripting. Many Web sites that are on the Internet or on an intranet use Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use Active Scripting to provide menus, ordering forms, or even account statements. Prompting before running Active Scripting is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run Active Scripting. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone".

Add sites that you trust to the Internet Explorer Trusted sites zone

After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

To do this, follow these steps:

1.


In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.

2.


In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.

3.


If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.

4.


In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.

5.


Repeat these steps for each site that you want to add to the zone.

6.


Click OK two times to accept the changes and return to Internet Explorer.

Note Add any sites that you trust not to take malicious action on your system. Two in particular that you may want to add are *.windowsupdate.microsoft.com and *.update.microsoft.com. These are the sites that will host the update, and it requires an ActiveX Control to install the update.
Top of sectionTop of section

FAQ for HTML Object Memory Corruption Vulnerability - CVE-2010-3340

What is the scope of the vulnerability?
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could gain the same user rights as the logged-on user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

What causes the vulnerability?
When Internet Explorer attempts to access incorrectly initialized memory under certain conditions, it may corrupt memory in such a way that an attacker could execute arbitrary code.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could gain the same user rights as a logged-on user. If the user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

How could an attacker exploit the vulnerability?
An attacker could host a specially crafted Web site that is designed to exploit this vulnerability through Internet Explorer and then convince a user to view the Web site. The attacker could also take advantage of compromised Web sites and Web sites that accept or host user-provided content or advertisements. These Web sites could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or in an Instant Messenger message that takes users to the attacker's Web site. It could also be possible to display specially crafted Web content by using banner advertisements or by using other methods to deliver Web content to affected systems.

What systems are primarily at risk from the vulnerability?
This vulnerability requires that a user be logged on and visiting a Web site for any malicious action to occur. Therefore, any systems where Internet Explorer is used frequently, such as workstations or terminal servers, are at the most risk from this vulnerability.

I am running Internet Explorer for Windows Server 2003 or Windows Server 2008. Does this mitigate this vulnerability?
Yes. By default, Internet Explorer on Windows Server 2003 and Windows Server 2008 runs in a restricted mode that is known as Enhanced Security Configuration. Enhanced Security Configuration is a group of preconfigured settings in Internet Explorer that can reduce the likelihood of a user or administrator downloading and running specially crafted Web content on a server. This is a mitigating factor for Web sites that you have not added to the Internet Explorer Trusted sites zone. See also Managing Internet Explorer Enhanced Security Configuration.

What does the update do?
The update addresses the vulnerability by modifying the way that Internet Explorer handles objects in memory.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through coordinated vulnerability disclosure.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers when this security bulletin was originally issued.
Top of sectionTop of section
Top of sectionTop of section

Cross-Domain Information Disclosure Vulnerability - CVE-2010-3342

An information disclosure vulnerability exists in Internet Explorer that could allow script to gain access to information in another domain or Internet Explorer zone. An attacker could exploit the vulnerability by constructing a specially crafted Web page that could allow information disclosure if a user viewed the Web page. An attacker who successfully exploited this vulnerability could view content from another domain or Internet Explorer zone.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2010-3342.

Mitigating Factors for Cross-Domain Information Disclosure Vulnerability - CVE-2010-3342

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:


By default, Internet Explorer on Windows Server 2003 and Windows Server 2008 runs in a restricted mode that is known as Enhanced Security Configuration. This mode sets the security level for the Internet zone to High. This is a mitigating factor for Web sites that you have not added to the Internet Explorer Trusted sites zone. See the FAQ subsection of this vulnerability section for more information about Internet Explorer Enhanced Security Configuration.


By default, all supported versions of Microsoft Outlook, Microsoft Outlook Express, and Windows Mail open HTML e-mail messages in the Restricted sites zone, which disables script and ActiveX controls, removing the risk of an attacker being able to use this vulnerability to execute malicious code. If a user clicks a link in an e-mail message, the user could still be vulnerable to exploitation of this vulnerability through the Web-based attack scenario.


An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
Top of sectionTop of section

Workarounds for Cross-Domain Information Disclosure Vulnerability - CVE-2010-3342

Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality:


Read e-mails in plain text

To help protect yourself from the e-mail attack vector, read e-mail messages in plain text format.

Microsoft Office Outlook 2002 users who have applied Office XP Service Pack 1 or a later version and Microsoft Office Outlook Express 6 users who have applied Internet Explorer 6 Service Pack 1 or a later version can enable this setting and view e-mail messages that are not digitally signed or e-mail messages that are not encrypted in plain text only.

Digitally signed e-mail messages or encrypted e-mail messages are not affected by the setting and may be read in their original formats. For more information about how to enable this setting in Outlook 2002, see Microsoft Knowledge Base Article 307594.

For information about this setting in Outlook Express 6, see Microsoft Knowledge Base Article 291387.

Impact of workaround. E-mail messages that are viewed in plain text format will not contain pictures, specialized fonts, animations, or other rich content. Additionally:


The changes are applied to the preview pane and to open messages.


Pictures become attachments so that they are not lost.


Because the message is still in Rich Text or HTML format in the store, the object model (custom code solutions) may behave unexpectedly.


Set Internet and Local intranet security zone settings to "High" to block ActiveX Controls and Active Scripting in these zones

You can help protect against exploitation of this vulnerability by changing your settings for the Internet security zone to block ActiveX controls and Active Scripting. You can do this by setting your browser security to High.

To raise the browsing security level in Internet Explorer, follow these steps:

1.


On the Internet Explorer Tools menu, click Internet Options.

2.


In the Internet Options dialog box, click the Security tab, and then click the Internet icon.

3.


Under Security level for this zone, move the slider to High. This sets the security level for all Web sites you visit to High.

Note If no slider is visible, click Default Level, and then move the slider to High.

Note Setting the level to High may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly even with the security setting set to High.

Impact of workaround. There are side effects to blocking ActiveX Controls and Active Scripting. Many Web sites that are on the Internet or on an intranet use ActiveX or Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX Controls to provide menus, ordering forms, or even account statements. Blocking ActiveX Controls or Active Scripting is a global setting that affects all Internet and intranet sites. If you do not want to block ActiveX Controls or Active Scripting for such sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone".

Add sites that you trust to the Internet Explorer Trusted sites zone

After you set Internet Explorer to block ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect yourself from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

To do this, follow these steps:

1.


In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.

2.


In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.

3.


If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.

4.


In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.

5.


Repeat these steps for each site that you want to add to the zone.

6.


Click OK two times to accept the changes and return to Internet Explorer.

Note Add any sites that you trust not to take malicious action on your system. Two in particular that you may want to add are *.windowsupdate.microsoft.com and *.update.microsoft.com. These are the sites that will host the update, and it requires an ActiveX Control to install the update.


Configure Internet Explorer to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone

You can help protect against exploitation of this vulnerability by changing your settings to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone. To do this, follow these steps:

1.


In Internet Explorer, click Internet Options on the Tools menu.

2.


Click the Security tab.

3.


Click Internet, and then click Custom Level.

4.


Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.

5.


Click Local intranet, and then click Custom Level.

6.


Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.

7.


Click OK two times to return to Internet Explorer.

Note Disabling Active Scripting in the Internet and Local intranet security zones may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly.

Impact of workaround. There are side effects to prompting before running Active Scripting. Many Web sites that are on the Internet or on an intranet use Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use Active Scripting to provide menus, ordering forms, or even account statements. Prompting before running Active Scripting is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run Active Scripting. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone".

Add sites that you trust to the Internet Explorer Trusted sites zone

After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

To do this, follow these steps:

1.


In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.

2.


In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.

3.


If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.

4.


In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.

5.


Repeat these steps for each site that you want to add to the zone.

6.


Click OK two times to accept the changes and return to Internet Explorer.

Note Add any sites that you trust not to take malicious action on your system. Two in particular that you may want to add are *.windowsupdate.microsoft.com and *.update.microsoft.com. These are the sites that will host the update, and it requires an ActiveX Control to install the update.
Top of sectionTop of section

FAQ for Cross-Domain Information Disclosure Vulnerability - CVE-2010-3342

What is the scope of the vulnerability?
This is an information disclosure vulnerability. An attacker who exploited the vulnerability when a user views a Web page could view content from the local computer or a browser window in a domain or Internet Explorer zone other than the domain or zone of the attacker's Web page.

What causes the vulnerability?
Internet Explorer caches data and incorrectly allows the cached content to be rendered as HTML, potentially bypassing Internet Explorer domain restriction.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could view content from the local computer or browser window in another domain or Internet Explorer zone.

How could an attacker exploit the vulnerability?
An attacker could host a specially crafted Web site that is designed to exploit this vulnerability through Internet Explorer and then convince a user to view the Web site. The attacker could also take advantage of compromised Web sites and Web sites that accept or host user-provided content or advertisements. These Web sites could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or in an Instant Messenger message that takes users to the attacker's Web site. It could also be possible to display specially crafted Web content by using banner advertisements or by using other methods to deliver Web content to affected systems.

What systems are primarily at risk from the vulnerability?
This vulnerability requires that a user be logged on and visiting a Web site for any malicious action to occur. Therefore, any systems where Internet Explorer is used frequently, such as workstations or terminal servers, are at the most risk from this vulnerability.

I am running Internet Explorer for Windows Server 2003 or Windows Server 2008. Does this mitigate this vulnerability?
Yes. By default, Internet Explorer on Windows Server 2003 and Windows Server 2008 runs in a restricted mode that is known as Enhanced Security Configuration. Enhanced Security Configuration is a group of preconfigured settings in Internet Explorer that can reduce the likelihood of a user or administrator downloading and running specially crafted Web content on a server. This is a mitigating factor for Web sites that you have not added to the Internet Explorer Trusted sites zone. See also Managing Internet Explorer Enhanced Security Configuration.

What does the update do?
The update addresses the vulnerability by modifying the way that Internet Explorer handles script during certain processes.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
Yes. This vulnerability has been publicly disclosed. It has been assigned Common Vulnerability and Exposure number CVE-2010-3342.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued.
Top of sectionTop of section
Top of sectionTop of section

HTML Object Memory Corruption Vulnerability - CVE-2010-3343

A remote code execution vulnerability exists in the way that Internet Explorer accesses an object that has not been correctly initialized or has been deleted. An attacker could exploit the vulnerability by constructing a specially crafted Web page. When a user views the Web page, the vulnerability could allow remote code execution. An attacker who successfully exploited this vulnerability could gain the same user rights as the logged-on user. If a user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2010-3343.

Mitigating Factors for HTML Object Memory Corruption Vulnerability - CVE-2010-3343

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:


By default, Internet Explorer on Windows Server 2003 and Windows Server 2008 runs in a restricted mode that is known as Enhanced Security Configuration. This mode sets the security level for the Internet zone to High. This is a mitigating factor for Web sites that you have not added to the Internet Explorer Trusted sites zone. See the FAQ subsection of this vulnerability section for more information about Internet Explorer Enhanced Security Configuration.


In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site.


An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
Top of sectionTop of section

Workarounds for HTML Object Memory Corruption Vulnerability - CVE-2010-3343

Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality:


Disable LMClassFactory

Remove the Liquid Motion Class key from the registry.

Warning If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.

1.


Create a backup copy of the registry keys by using the following command from an elevated command prompt:

Regedit.exe /e Disable_LM_Factory_backup.reg HKEY_CLASSES_ROOT\CLSID\{B1549E58-3894-11D2-BB7F-00A0C999C4C1}

2.


Paste the following text in a text editor such as Notepad. Then, save the file by using the .reg file name extension, such as Disable_LM_Factory.reg:

Windows Registry Editor Version 5.00

[-HKEY_CLASSES_ROOT\CLSID\{B1549E58-3894-11D2-BB7F-00A0C999C4C1}]

3.


Run Disable_LM_Factory.reg with the following command from an elevated command prompt:

Regedit.exe /s Disable_LM_Factory.reg

Impact of Workaround. Functionalities that use Liquid Motion are disabled. For more information about Liquid Motion, see Microsoft Knowledge Base Article 257557.

How to undo the workaround.

Restore the original state by running the following command from an elevated command prompt:

Regedit.exe /s Disable_LM_Factory_backup.reg


Set Internet and Local intranet security zone settings to "High" to block ActiveX Controls and Active Scripting in these zones

You can help protect against exploitation of this vulnerability by changing your settings for the Internet security zone to block ActiveX controls and Active Scripting. You can do this by setting your browser security to High.

To raise the browsing security level in Internet Explorer, follow these steps:

1.


On the Internet Explorer Tools menu, click Internet Options.

2.


In the Internet Options dialog box, click the Security tab, and then click the Internet icon.

3.


Under Security level for this zone, move the slider to High. This sets the security level for all Web sites you visit to High.

Note If no slider is visible, click Default Level, and then move the slider to High.

Note Setting the level to High may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly even with the security setting set to High.

Impact of workaround. There are side effects to blocking ActiveX Controls and Active Scripting. Many Web sites that are on the Internet or on an intranet use ActiveX or Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX Controls to provide menus, ordering forms, or even account statements. Blocking ActiveX Controls or Active Scripting is a global setting that affects all Internet and intranet sites. If you do not want to block ActiveX Controls or Active Scripting for such sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone".

Add sites that you trust to the Internet Explorer Trusted sites zone

After you set Internet Explorer to block ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect yourself from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

To do this, follow these steps:

1.


In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.

2.


In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.

3.


If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.

4.


In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.

5.


Repeat these steps for each site that you want to add to the zone.

6.


Click OK two times to accept the changes and return to Internet Explorer.

Note Add any sites that you trust not to take malicious action on your system. Two in particular that you may want to add are *.windowsupdate.microsoft.com and *.update.microsoft.com. These are the sites that will host the update, and it requires an ActiveX Control to install the update.


Configure Internet Explorer to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone

You can help protect against exploitation of this vulnerability by changing your settings to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone. To do this, follow these steps:

1.


In Internet Explorer, click Internet Options on the Tools menu.

2.


Click the Security tab.

3.


Click Internet, and then click Custom Level.

4.


Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.

5.


Click Local intranet, and then click Custom Level.

6.


Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.

7.


Click OK two times to return to Internet Explorer.

Note Disabling Active Scripting in the Internet and Local intranet security zones may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly.

Impact of workaround. There are side effects to prompting before running Active Scripting. Many Web sites that are on the Internet or on an intranet use Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use Active Scripting to provide menus, ordering forms, or even account statements. Prompting before running Active Scripting is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run Active Scripting. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone".

Add sites that you trust to the Internet Explorer Trusted sites zone

After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

To do this, follow these steps:

1.


In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.

2.


In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.

3.


If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.

4.


In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.

5.


Repeat these steps for each site that you want to add to the zone.

6.


Click OK two times to accept the changes and return to Internet Explorer.

Note Add any sites that you trust not to take malicious action on your system. Two in particular that you may want to add are *.windowsupdate.microsoft.com and *.update.microsoft.com. These are the sites that will host the update, and it requires an ActiveX Control to install the update.
Top of sectionTop of section

FAQ for HTML Object Memory Corruption Vulnerability - CVE-2010-3343

What is the scope of the vulnerability?
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could gain the same user rights as the logged-on user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

What causes the vulnerability?
When Internet Explorer attempts to access incorrectly initialized memory under certain conditions, it may corrupt memory in such a way that an attacker could execute arbitrary code.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could gain the same user rights as a logged-on user. If the user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

How could an attacker exploit the vulnerability?
An attacker could host a specially crafted Web site that is designed to exploit this vulnerability through Internet Explorer and then convince a user to view the Web site. The attacker could also take advantage of compromised Web sites and Web sites that accept or host user-provided content or advertisements. These Web sites could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or in an Instant Messenger message that takes users to the attacker's Web site. It could also be possible to display specially crafted Web content by using banner advertisements or by using other methods to deliver Web content to affected systems.

What systems are primarily at risk from the vulnerability?
This vulnerability requires that a user be logged on and visiting a Web site for any malicious action to occur. Therefore, any systems where Internet Explorer is used frequently, such as workstations or terminal servers, are at the most risk from this vulnerability.

I am running Internet Explorer for Windows Server 2003 or Windows Server 2008. Does this mitigate this vulnerability?
Yes. By default, Internet Explorer on Windows Server 2003 and Windows Server 2008 runs in a restricted mode that is known as Enhanced Security Configuration. Enhanced Security Configuration is a group of preconfigured settings in Internet Explorer that can reduce the likelihood of a user or administrator downloading and running specially crafted Web content on a server. This is a mitigating factor for Web sites that you have not added to the Internet Explorer Trusted sites zone. See also Managing Internet Explorer Enhanced Security Configuration.

What does the update do?
The update addresses the vulnerability by modifying the way that Internet Explorer handles objects in memory.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through coordinated vulnerability disclosure.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers when this security bulletin was originally issued.
Top of sectionTop of section
Top of sectionTop of section

HTML Element Memory Corruption Vulnerability - CVE-2010-3345

A remote code execution vulnerability exists in the way that Internet Explorer accesses an object that has not been correctly initialized or has been deleted. An attacker could exploit the vulnerability by constructing a specially crafted Web page. When a user views the Web page, the vulnerability could allow remote code execution. An attacker who successfully exploited this vulnerability could gain the same user rights as the logged-on user. If a user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2010-3345.

Mitigating Factors for HTML Element Memory Corruption Vulnerability - CVE-2010-3345

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:


In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site.


An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.


By default, all supported versions of Microsoft Outlook, Microsoft Outlook Express, and Windows Mail open HTML e-mail messages in the Restricted sites zone, which disables script and ActiveX controls, removing the risk of an attacker being able to use this vulnerability to execute malicious code. If a user clicks a link in an e-mail message, the user could still be vulnerable to exploitation of this vulnerability through the Web-based attack scenario.


By default, Internet Explorer on Windows Server 2003 and Windows Server 2008 runs in a restricted mode that is known as Enhanced Security Configuration. This mode sets the security level for the Internet zone to High. This is a mitigating factor for Web sites that you have not added to the Internet Explorer Trusted sites zone. See the FAQ subsection of this vulnerability section for more information about Internet Explorer Enhanced Security Configuration.
Top of sectionTop of section

Workarounds for HTML Element Memory Corruption Vulnerability - CVE-2010-3345

Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality:


Set Internet and Local intranet security zone settings to "High" to block ActiveX Controls and Active Scripting in these zones

You can help protect against exploitation of this vulnerability by changing your settings for the Internet security zone to block ActiveX controls and Active Scripting. You can do this by setting your browser security to High.

To raise the browsing security level in Internet Explorer, follow these steps:

1.


On the Internet Explorer Tools menu, click Internet Options.

2.


In the Internet Options dialog box, click the Security tab, and then click the Internet icon.

3.


Under Security level for this zone, move the slider to High. This sets the security level for all Web sites you visit to High.

Note If no slider is visible, click Default Level, and then move the slider to High.

Note Setting the level to High may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly even with the security setting set to High.

Impact of workaround. There are side effects to blocking ActiveX Controls and Active Scripting. Many Web sites that are on the Internet or on an intranet use ActiveX or Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX Controls to provide menus, ordering forms, or even account statements. Blocking ActiveX Controls or Active Scripting is a global setting that affects all Internet and intranet sites. If you do not want to block ActiveX Controls or Active Scripting for such sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone".

Add sites that you trust to the Internet Explorer Trusted sites zone

After you set Internet Explorer to block ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect yourself from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

To do this, follow these steps:

1.


In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.

2.


In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.

3.


If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.

4.


In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.

5.


Repeat these steps for each site that you want to add to the zone.

6.


Click OK two times to accept the changes and return to Internet Explorer.

Note Add any sites that you trust not to take malicious action on your system. Two in particular that you may want to add are *.windowsupdate.microsoft.com and *.update.microsoft.com. These are the sites that will host the update, and it requires an ActiveX Control to install the update.


Configure Internet Explorer to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone

You can help protect against exploitation of this vulnerability by changing your settings to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone. To do this, follow these steps:

1.


In Internet Explorer, click Internet Options on the Tools menu.

2.


Click the Security tab.

3.


Click Internet, and then click Custom Level.

4.


Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.

5.


Click Local intranet, and then click Custom Level.

6.


Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.

7.


Click OK two times to return to Internet Explorer.

Note Disabling Active Scripting in the Internet and Local intranet security zones may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly.

Impact of workaround. There are side effects to prompting before running Active Scripting. Many Web sites that are on the Internet or on an intranet use Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use Active Scripting to provide menus, ordering forms, or even account statements. Prompting before running Active Scripting is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run Active Scripting. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone".

Add sites that you trust to the Internet Explorer Trusted sites zone

After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

To do this, follow these steps:

1.


In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.

2.


In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.

3.


If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.

4.


In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.

5.


Repeat these steps for each site that you want to add to the zone.

6.


Click OK two times to accept the changes and return to Internet Explorer.

Note Add any sites that you trust not to take malicious action on your system. Two in particular that you may want to add are *.windowsupdate.microsoft.com and *.update.microsoft.com. These are the sites that will host the update, and it requires an ActiveX Control to install the update.
Top of sectionTop of section

FAQ for HTML Element Memory Corruption Vulnerability - CVE-2010-3345

What is the scope of the vulnerability?
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could gain the same user rights as the logged-on user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

What causes the vulnerability?
When Internet Explorer attempts to access incorrectly initialized memory under certain conditions, it may corrupt memory in such a way that an attacker could execute arbitrary code.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could gain the same user rights as a logged-on user. If the user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

How could an attacker exploit the vulnerability?
An attacker could host a specially crafted Web site that is designed to exploit this vulnerability through Internet Explorer and then convince a user to view the Web site. An attacker could also embed an ActiveX control marked "safe for initialization" in an application or Microsoft Office document that hosts the IE rendering engine. The attacker could also take advantage of compromised Web sites and Web sites that accept or host user-provided content or advertisements. These Web sites could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to view the attacker-controlled content. Instead, an attacker would have to convince users to take action, typically by clicking a link in an e-mail message or in an Instant Messenger message that takes users to the attacker's Web site, or by opening an attachment sent through e-mail.

What systems are primarily at risk from the vulnerability?
This vulnerability requires that a user be logged on and visiting a Web site for any malicious action to occur. Therefore, any systems where Internet Explorer is used frequently, such as workstations or terminal servers, are at the most risk from this vulnerability.

I am running Internet Explorer for Windows Server 2003 or Windows Server 2008. Does this mitigate this vulnerability?
Yes. By default, Internet Explorer on Windows Server 2003 and Windows Server 2008 runs in a restricted mode that is known as Enhanced Security Configuration. Enhanced Security Configuration is a group of preconfigured settings in Internet Explorer that can reduce the likelihood of a user or administrator downloading and running specially crafted Web content on a server. This is a mitigating factor for Web sites that you have not added to the Internet Explorer Trusted sites zone. See also Managing Internet Explorer Enhanced Security Configuration.

What does the update do?
The update addresses the vulnerability by modifying the way that Internet Explorer handles objects in memory.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through coordinated vulnerability disclosure.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers when this security bulletin was originally issued.
Top of sectionTop of section
Top of sectionTop of section

HTML Element Memory Corruption Vulnerability - CVE-2010-3346

A remote code execution vulnerability exists in the way that Internet Explorer accesses an object that has not been correctly initialized or has been deleted. An attacker could exploit the vulnerability by constructing a specially crafted Web page. When a user views the Web page, the vulnerability could allow remote code execution. An attacker who successfully exploited this vulnerability could gain the same user rights as the logged-on user. If a user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2010-3346.

Mitigating Factors for HTML Element Memory Corruption Vulnerability - CVE-2010-3346

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:


In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site.


An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.


By default, all supported versions of Microsoft Outlook, Microsoft Outlook Express, and Windows Mail open HTML e-mail messages in the Restricted sites zone, which disables script and ActiveX controls, removing the risk of an attacker being able to use this vulnerability to execute malicious code. If a user clicks a link in an e-mail message, the user could still be vulnerable to exploitation of this vulnerability through the Web-based attack scenario.


By default, Internet Explorer on Windows Server 2003 and Windows Server 2008 runs in a restricted mode that is known as Enhanced Security Configuration. This mode sets the security level for the Internet zone to High. This is a mitigating factor for Web sites that you have not added to the Internet Explorer Trusted sites zone. See the FAQ subsection of this vulnerability section for more information about Internet Explorer Enhanced Security Configuration.
Top of sectionTop of section

Workarounds for HTML Element Memory Corruption Vulnerability - CVE-2010-3346

Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality:


Set Internet and Local intranet security zone settings to "High" to block ActiveX Controls and Active Scripting in these zones

You can help protect against exploitation of this vulnerability by changing your settings for the Internet security zone to block ActiveX controls and Active Scripting. You can do this by setting your browser security to High.

To raise the browsing security level in Internet Explorer, follow these steps:

1.


On the Internet Explorer Tools menu, click Internet Options.

2.


In the Internet Options dialog box, click the Security tab, and then click the Internet icon.

3.


Under Security level for this zone, move the slider to High. This sets the security level for all Web sites you visit to High.

Note If no slider is visible, click Default Level, and then move the slider to High.

Note Setting the level to High may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly even with the security setting set to High.

Impact of workaround. There are side effects to blocking ActiveX Controls and Active Scripting. Many Web sites that are on the Internet or on an intranet use ActiveX or Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX Controls to provide menus, ordering forms, or even account statements. Blocking ActiveX Controls or Active Scripting is a global setting that affects all Internet and intranet sites. If you do not want to block ActiveX Controls or Active Scripting for such sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone".

Add sites that you trust to the Internet Explorer Trusted sites zone

After you set Internet Explorer to block ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect yourself from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

To do this, follow these steps:

1.


In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.

2.


In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.

3.


If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.

4.


In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.

5.


Repeat these steps for each site that you want to add to the zone.

6.


Click OK two times to accept the changes and return to Internet Explorer.

Note Add any sites that you trust not to take malicious action on your system. Two in particular that you may want to add are *.windowsupdate.microsoft.com and *.update.microsoft.com. These are the sites that will host the update, and it requires an ActiveX Control to install the update.


Configure Internet Explorer to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone

You can help protect against exploitation of this vulnerability by changing your settings to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone. To do this, follow these steps:

1.


In Internet Explorer, click Internet Options on the Tools menu.

2.


Click the Security tab.

3.


Click Internet, and then click Custom Level.

4.


Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.

5.


Click Local intranet, and then click Custom Level.

6.


Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.

7.


Click OK two times to return to Internet Explorer.

Note Disabling Active Scripting in the Internet and Local intranet security zones may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly.

Impact of workaround. There are side effects to prompting before running Active Scripting. Many Web sites that are on the Internet or on an intranet use Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use Active Scripting to provide menus, ordering forms, or even account statements. Prompting before running Active Scripting is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run Active Scripting. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone".

Add sites that you trust to the Internet Explorer Trusted sites zone

After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

To do this, follow these steps:

1.


In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.

2.


In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.

3.


If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.

4.


In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.

5.


Repeat these steps for each site that you want to add to the zone.

6.


Click OK two times to accept the changes and return to Internet Explorer.

Note Add any sites that you trust not to take malicious action on your system. Two in particular that you may want to add are *.windowsupdate.microsoft.com and *.update.microsoft.com. These are the sites that will host the update, and it requires an ActiveX Control to install the update.


Modify the Access Control List (ACL) on mstime.dll

Modify the ACL to disable mstime.dll.

On Windows XP and Windows Server 2003, run the following command from an administrative command line:

Echo y| cacls %WINDIR%\SYSTEM32\mstime.DLL /E /P everyone:N

On Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2, run the following commands from an elevated command line:

Takeown.exe /f %WINDIR%\SYSTEM32\mstime.DLL
Icacls.exe %WINDIR%\SYSTEM32\mstime.DLL /save %TEMP%\mstime_ACL.TXT
Icacls.exe %WINDIR%\SYSTEM32\mstime.DLL /deny everyone:(F)

Impact of workaround. Functionality such as HTML and TIME are disabled.

How to undo the workaround.

On Windows XP and Windows Server 2003, run the following command from an administrative command line:

cacls %WINDIR%\SYSTEM32\mstime.dll /E /R everyone

On Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2, run the following commands from an elevated command line:

icacls %WINDIR%\SYSTEM32\mstime.DLL /grant everyone:(F)
icacls %WINDIR%\SYSTEM32 /restore %TEMP%\mstime_ACL.TXT

Top of sectionTop of section

FAQ for HTML Element Memory Corruption Vulnerability - CVE-2010-3346

What is the scope of the vulnerability?
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could gain the same user rights as the logged-on user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

What causes the vulnerability?
When Internet Explorer attempts to access incorrectly initialized memory under certain conditions, it may corrupt memory in such a way that an attacker could execute arbitrary code.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could gain the same user rights as a logged-on user. If the user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

How could an attacker exploit the vulnerability?
An attacker could host a specially crafted Web site that is designed to exploit this vulnerability through Internet Explorer and then convince a user to view the Web site. An attacker could also embed an ActiveX control marked "safe for initialization" in an application or Microsoft Office document that hosts the IE rendering engine. The attacker could also take advantage of compromised Web sites and Web sites that accept or host user-provided content or advertisements. These Web sites could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to view the attacker-controlled content. Instead, an attacker would have to convince users to take action, typically by clicking a link in an e-mail message or in an Instant Messenger message that takes users to the attacker's Web site, or by opening an attachment sent through e-mail.

What systems are primarily at risk from the vulnerability?
This vulnerability requires that a user be logged on and visiting a Web site for any malicious action to occur. Therefore, any systems where Internet Explorer is used frequently, such as workstations or terminal servers, are at the most risk from this vulnerability.

I am running Internet Explorer for Windows Server 2003 or Windows Server 2008. Does this mitigate this vulnerability?
Yes. By default, Internet Explorer on Windows Server 2003 and Windows Server 2008 runs in a restricted mode that is known as Enhanced Security Configuration. Enhanced Security Configuration is a group of preconfigured settings in Internet Explorer that can reduce the likelihood of a user or administrator downloading and running specially crafted Web content on a server. This is a mitigating factor for Web sites that you have not added to the Internet Explorer Trusted sites zone. See also Managing Internet Explorer Enhanced Security Configuration.

What does the update do?
The update addresses the vulnerability by modifying the way that Internet Explorer handles objects in memory.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through coordinated vulnerability disclosure.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers when this security bulletin was originally issued.
Top of sectionTop of section
Top of sectionTop of section

Cross-Domain Information Disclosure Vulnerability - CVE-2010-3348

An information disclosure vulnerability exists in Internet Explorer that could allow script to gain access to information in another domain or Internet Explorer zone. An attacker could exploit the vulnerability by constructing a specially crafted Web page that could allow information disclosure if a user viewed the Web page. An attacker who successfully exploited this vulnerability could view content from another domain or Internet Explorer zone.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2010-3348.

Mitigating Factors for Cross-Domain Information Disclosure Vulnerability - CVE-2010-3348

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:


By default, Internet Explorer on Windows Server 2003 and Windows Server 2008 runs in a restricted mode that is known as Enhanced Security Configuration. This mode sets the security level for the Internet zone to High. This is a mitigating factor for Web sites that you have not added to the Internet Explorer Trusted sites zone. See the FAQ subsection of this vulnerability section for more information about Internet Explorer Enhanced Security Configuration.


By default, all supported versions of Microsoft Outlook, Microsoft Outlook Express, and Windows Mail open HTML e-mail messages in the Restricted sites zone, which disables script and ActiveX controls, removing the risk of an attacker being able to use this vulnerability to execute malicious code. If a user clicks a link in an e-mail message, the user could still be vulnerable to exploitation of this vulnerability through the Web-based attack scenario.
Top of sectionTop of section

Workarounds for Cross-Domain Information Disclosure Vulnerability - CVE-2010-3348

Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality:


Read e-mails in plain text

To help protect yourself from the e-mail attack vector, read e-mail messages in plain text format.

Microsoft Office Outlook 2002 users who have applied Office XP Service Pack 1 or a later version and Microsoft Office Outlook Express 6 users who have applied Internet Explorer 6 Service Pack 1 or a later version can enable this setting and view e-mail messages that are not digitally signed or e-mail messages that are not encrypted in plain text only.

Digitally signed e-mail messages or encrypted e-mail messages are not affected by the setting and may be read in their original formats. For more information about how to enable this setting in Outlook 2002, see Microsoft Knowledge Base Article 307594.

For information about this setting in Outlook Express 6, see Microsoft Knowledge Base Article 291387.

Impact of workaround. E-mail messages that are viewed in plain text format will not contain pictures, specialized fonts, animations, or other rich content. Additionally:


The changes are applied to the preview pane and to open messages.


Pictures become attachments so that they are not lost.


Because the message is still in Rich Text or HTML format in the store, the object model (custom code solutions) may behave unexpectedly.


Set Internet and Local intranet security zone settings to "High" to block ActiveX Controls and Active Scripting in these zones

You can help protect against exploitation of this vulnerability by changing your settings for the Internet security zone to block ActiveX controls and Active Scripting. You can do this by setting your browser security to High.

To raise the browsing security level in Internet Explorer, follow these steps:

1.


On the Internet Explorer Tools menu, click Internet Options.

2.


In the Internet Options dialog box, click the Security tab, and then click the Internet icon.

3.


Under Security level for this zone, move the slider to High. This sets the security level for all Web sites you visit to High.

Note If no slider is visible, click Default Level, and then move the slider to High.

Note Setting the level to High may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly even with the security setting set to High.

Impact of workaround. There are side effects to blocking ActiveX Controls and Active Scripting. Many Web sites that are on the Internet or on an intranet use ActiveX or Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX Controls to provide menus, ordering forms, or even account statements. Blocking ActiveX Controls or Active Scripting is a global setting that affects all Internet and intranet sites. If you do not want to block ActiveX Controls or Active Scripting for such sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone".

Add sites that you trust to the Internet Explorer Trusted sites zone

After you set Internet Explorer to block ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect yourself from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

To do this, follow these steps:

1.


In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.

2.


In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.

3.


If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.

4.


In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.

5.


Repeat these steps for each site that you want to add to the zone.

6.


Click OK two times to accept the changes and return to Internet Explorer.

Note Add any sites that you trust not to take malicious action on your system. Two in particular that you may want to add are *.windowsupdate.microsoft.com and *.update.microsoft.com. These are the sites that will host the update, and it requires an ActiveX Control to install the update.


Configure Internet Explorer to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone

You can help protect against exploitation of this vulnerability by changing your settings to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone. To do this, follow these steps:

1.


In Internet Explorer, click Internet Options on the Tools menu.

2.


Click the Security tab.

3.


Click Internet, and then click Custom Level.

4.


Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.

5.


Click Local intranet, and then click Custom Level.

6.


Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.

7.


Click OK two times to return to Internet Explorer.

Note Disabling Active Scripting in the Internet and Local intranet security zones may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly.

Impact of workaround. There are side effects to prompting before running Active Scripting. Many Web sites that are on the Internet or on an intranet use Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use Active Scripting to provide menus, ordering forms, or even account statements. Prompting before running Active Scripting is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run Active Scripting. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone".

Add sites that you trust to the Internet Explorer Trusted sites zone

After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

To do this, follow these steps:

1.


In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.

2.


In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.

3.


If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.

4.


In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.

5.


Repeat these steps for each site that you want to add to the zone.

6.


Click OK two times to accept the changes and return to Internet Explorer.

Note Add any sites that you trust not to take malicious action on your system. Two in particular that you may want to add are *.windowsupdate.microsoft.com and *.update.microsoft.com. These are the sites that will host the update, and it requires an ActiveX Control to install the update.
Top of sectionTop of section

FAQ for Cross-Domain Information Disclosure Vulnerability - CVE-2010-3348

What is the scope of the vulnerability?
This is an information disclosure vulnerability. An attacker who exploited the vulnerability when a user views a Web page could view content from the local computer or a browser window in a domain or Internet Explorer zone other than the domain or zone of the attacker's Web page.

What causes the vulnerability?
Internet Explorer caches data and incorrectly allows the cached content to be rendered as HTML, potentially bypassing Internet Explorer domain restriction.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could view content from the local computer or browser window in another domain or Internet Explorer zone.

How could an attacker exploit the vulnerability?
An attacker could host a specially crafted Web site that is designed to exploit this vulnerability through Internet Explorer and then convince a user to view the Web site. The attacker could also take advantage of compromised Web sites and Web sites that accept or host user-provided content or advertisements. These Web sites could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or in an Instant Messenger message that takes users to the attacker's Web site. It could also be possible to display specially crafted Web content by using banner advertisements or by using other methods to deliver Web content to affected systems.

What systems are primarily at risk from the vulnerability?
This vulnerability requires that a user be logged on and visiting a Web site for any malicious action to occur. Therefore, any systems where Internet Explorer is used frequently, such as workstations or terminal servers, are at the most risk from this vulnerability.

I am running Internet Explorer for Windows Server 2003 or Windows Server 2008. Does this mitigate this vulnerability?
Yes. By default, Internet Explorer on Windows Server 2003 and Windows Server 2008 runs in a restricted mode that is known as Enhanced Security Configuration. Enhanced Security Configuration is a group of preconfigured settings in Internet Explorer that can reduce the likelihood of a user or administrator downloading and running specially crafted Web content on a server. This is a mitigating factor for Web sites that you have not added to the Internet Explorer Trusted sites zone. See also Managing Internet Explorer Enhanced Security Configuration.

What does the update do?
The update addresses the vulnerability by modifying the way that Internet Explorer handles script during certain processes.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
Yes. This vulnerability has been publicly disclosed. It has been assigned Common Vulnerability and Exposure number CVE-2010-3348.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued.
Top of sectionTop of section
Top of sectionTop of section

Uninitialized Memory Corruption Vulnerability - CVE-2010-3962

A remote code execution vulnerability exists in the way that Internet Explorer accesses an object that has not been correctly initialized or has been deleted. An attacker could exploit the vulnerability by convincing the user to open a malicious Word document. When a user closes the document, the vulnerability could allow remote code execution. An attacker who successfully exploited this vulnerability could gain the same user rights as the logged-on user. If a user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2010-3962.

Mitigating Factors for Uninitialized Memory Corruption Vulnerability - CVE-2010-3962

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:


Data Execution Prevention (DEP) helps protect against attacks that result in code execution and is enabled by default in Internet Explorer 8 on the following Windows operating systems: Windows XP Service Pack 3, Windows Vista Service Pack 1, Windows Vista Service Pack 2, and Windows 7.


In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site.


An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
Top of sectionTop of section

Workarounds for Uninitialized Memory Corruption Vulnerability - CVE-2010-3962

Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality:


Override the Web site CSS with a user-defined style sheet

To apply a custom cascading style sheet (CSS) for formatting documents loaded in Internet Explorer, save the following text to a file with a .CSS extension, such as KB2458511.CSS:

TABLE
{
   POSI\TION: relative !important;
}

Note The "\" literal that appears between "POSI" and "TION" above is intentional.

Impact of workaround. Applying a user-defined CSS may cause Web site style sheets to malfunction. If you previously applied this workaround, this workaround must be reversed before applying this security update. Use the automated Microsoft Fix it solution in Microsoft Knowledge Base Article 2458511 to disable this workaround.

To apply the change interactively

1.


In Internet Explorer, click Tools, then Internet Options.

2.


On the General tab, click the Accessibility button.

3.


Select Format documents using my style sheet, click Browse, then browse to location of the above file and select the file.

4.


Click Open, click OK twice, then restart Internet Explorer.

How to undo the workaround. Repeat the steps above except that for step 3, clear the Format documents using my style sheet box.

To apply the change using the Registry Editor

Warning If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.

1.


Create a backup copy of the registry keys by using the following command from an elevated command prompt:

regedit /e CSS-backup.reg "HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Styles"

If no CSS-backup.reg was created, it means that there is no user-defined CSS.

2.


Next, save the following to a file with a .REG extension, such as Apply_user_CSS.reg:

Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Styles]
"User Stylesheet"="C:\\[directory location]\\KB2458511.css"
"Use My Stylesheet"=dword:00000001

Note The [directory location] must match the location of the KB2458511.css on the local system.

3.


Then run Apply_user_CSS.reg to apply the setting.

How to undo the workaround. If a previous user-defined CSS existed, use the CSS-backup.reg file to restore the previous setting. If not, save the following to a file with a .REG extension, such as Remove_user_CSS.reg:

Windows Registry Editor Version 5.00
[-HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Styles]

Then run Remove_user_CSS.reg with the following command from an elevated command prompt:

Regedit.exe /s Remove_user_CSS.reg

To apply the change using the automated Microsoft Fix it solution

See Microsoft Knowledge Base Article 2458511 to use the automated Microsoft Fix it solution to enable or disable this workaround.


Enable Data Execution Prevention (DEP) for Internet Explorer 7

Local Administrators can control DEP/NX by running Internet Explorer as an Administrator. To enable DEP, use one of the following methods:

Enable DEP for Internet Explorer 7 interactively

1.


In Internet Explorer, click Tools, click Internet Options, and then click Advanced.

2.


Click Enable memory protection to help mitigate online attacks.

Impact of workaround. Some browser extensions may not be compatible with DEP and may exit unexpectedly.

How to undo workaround. If this occurs, you can disable the add-on, or revert the DEP setting using the Internet Control Panel. This is also accessible using the System Control panel.

Enable DEP for Internet Explorer 7 using automated Microsoft Fix It

See Microsoft Knowledge Base Article 2458511 to use the automated Microsoft Fix it solution to enable or disable this workaround.

Impact of workaround. Some browser extensions may not be compatible with DEP and may exit unexpectedly.

How to undo the workaround. If this occurs, you can disable the add-on, or revert the DEP setting using the automated Microsoft Fix it solution to disable the workaround.


Read e-mails in plain text

To help protect yourself from the e-mail attack vector, read e-mail messages in plain text format.

Microsoft Office Outlook 2002 users who have applied Office XP Service Pack 1 or a later version and Microsoft Office Outlook Express 6 users who have applied Internet Explorer 6 Service Pack 1 or a later version can enable this setting and view e-mail messages that are not digitally signed or e-mail messages that are not encrypted in plain text only.

Digitally signed e-mail messages or encrypted e-mail messages are not affected by the setting and may be read in their original formats. For more information about how to enable this setting in Outlook 2002, see Microsoft Knowledge Base Article 307594.

For information about this setting in Outlook Express 6, see Microsoft Knowledge Base Article 291387.

Impact of workaround. E-mail messages that are viewed in plain text format will not contain pictures, specialized fonts, animations, or other rich content. Additionally:


The changes are applied to the preview pane and to open messages.


Pictures become attachments so that they are not lost.


Because the message is still in Rich Text or HTML format in the store, the object model (custom code solutions) may behave unexpectedly.
Top of sectionTop of section

FAQ for Uninitialized Memory Corruption Vulnerability - CVE-2010-3962

What is the scope of the vulnerability?
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could gain the same user rights as the logged-on user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

What causes the vulnerability?
When Internet Explorer attempts to access an object that has not been initialized or has been deleted, it may corrupt memory in such a way that an attacker could execute arbitrary code in the context of the logged-on user.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could gain the same user rights as a logged-on user. If the user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

How could an attacker exploit the vulnerability?
An attacker could host a specially crafted Web site that is designed to exploit this vulnerability through Internet Explorer and then convince a user to view the Web site. The attacker could also take advantage of compromised Web sites and Web sites that accept or host user-provided content or advertisements. These Web sites could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or in an Instant Messenger message that takes users to the attacker's Web site. It could also be possible to display specially crafted Web content by using banner advertisements or by using other methods to deliver Web content to affected systems.

What systems are primarily at risk from the vulnerability?
This vulnerability requires that a user be logged on and visiting a Web site for any malicious action to occur. Therefore, any systems where Internet Explorer is used frequently, such as workstations or terminal servers, are at the most risk from this vulnerability.

What does the update do?
The update addresses the vulnerability by modifying the way that Internet Explorer handles objects in memory.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
Yes. This vulnerability has been publicly disclosed. It has been assigned Common Vulnerability and Exposure number CVE-2010-3962. This vulnerability was first described in Microsoft Security Advisory 2458511.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
Yes. Microsoft is aware of active attacks attempting to exploit the vulnerability.

Does applying this security update help protect customers from the code, published publicly, that attempts to exploit this vulnerability?
Yes. This security update addresses the vulnerability that is currently being exploited. The vulnerability that has been addressed has been assigned the Common Vulnerability and Exposure number CVE-2010-3962.

If I applied workarounds provided in Microsoft Security Advisory 2458511, do I need to reverse them before applying this update?
Microsoft recommends that you undo the "Override the Web site CSS" workaround from systems where you have previously applied it, before you install this security update. However, you may leave the "Deploy the Enhanced Mitigation Experience Toolkit" (EMET) and "Enable Data Execution Prevention (DEP) for Internet Explorer 7" workarounds in place as a defense-in-depth measure.

Other Information
Acknowledgments

Microsoft thanks the following for working with us to help protect customers:


Aniway of VeriSign iDefense Labs for reporting the HTML Object Memory Corruption Vulnerability (CVE-2010-3340)


Nicolas Joly of VUPEN Vulnerability Research Team for reporting the HTML Object Memory Corruption Vulnerability (CVE-2010-3343)


Stephen Fewer, working with TippingPoint's Zero Day Initiative, for reporting the HTML Element Memory Corruption Vulnerability (CVE-2010-3345)


Peter Vreugdenhil, working with TippingPoint's Zero Day Initiative, for reporting the HTML Element Memory Corruption Vulnerability (CVE-2010-3346)


Yosuke Hasegawa for working with us on the Cross-Domain Information Disclosure Vulnerability (CVE-2010-3348)


Jose Antonio Vazquez Gonzalez of VeriSign iDefense Labs for reporting the Uninitialized Memory Corruption Vulnerability (CVE-2010-3962)
Top of sectionTop of section
Microsoft Active Protections Program (MAPP)

To improve security protections for customers, Microsoft provides vulnerability information to major security software providers in advance of each monthly security update release. Security software providers can then use this vulnerability information to provide updated protections to customers via their security software or devices, such as antivirus, network-based intrusion detection systems, or host-based intrusion prevention systems. To determine whether active protections are available from security software providers, please visit the active protections Web sites provided by program partners, listed in Microsoft Active Protections Program (MAPP) Partners.

Support


Customers in the U.S. and Canada can receive technical support from Security Support or 1-866-PCSAFETY. There is no charge for support calls that are associated with security updates. For more information about available support options, see Microsoft Help and Support.


International customers can receive support from their local Microsoft subsidiaries. There is no charge for support that is associated with security updates. For more information about how to contact Microsoft for support issues, visit the International Support Web site.

Disclaimer

The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.

Revisions


V1.0 (December 14, 2010): Bulletin published.

About | Terms of use | Privacy Policy
© SecurityVulns, 3APA3A, Vladimir Dubrovin
Nizhny Novgorod